Controlpanelstylemayvarybymodel.
Cycles
Auto Clean
Manufacturer's recommended cycle choice for all day-
Normal dishloads vary from day to day. Auto Clean is recommended because it adjusts to each load, offering the best combination of cleaning, energy consumption and water usage for that load.
Standard cycles:
Heavy Wash
Long cycle for heavy food soils.
Normal Wash
Medinm cycle for average food soils. Light Wash
Short cycle for light food soils. Rinse Only
Rinses dishes being held until there is a filll load. Controls odors.
Select Sanitize with Auto Clean, Heavy, Normal, or Light Wash to sanitize dishware. At the end of the cycle, when the cycle monitor recognizes that the proper condi-
tions have been met, the SANITIZED light ilhlminates.
Select Extra Rinse to add a rinse to the cycle. An extra rinse helps to improve results in hard water situations.
The extra rinse is already built into the cycle when Heavy Wash is selected.
Select Heated Dry to turn on the heating element during dry for enhanced drying results. When Heated Dry is not selected, towel drying of some items such as plastic and teflon may be necessary and more moisture may be noticed adhering to the dishwasher interior. With either dry option, it is normal to notice vapor escaping from the door vent.
To drain the dishwasher and then turn it oft, press
Drain/Off once. Press Drain/Off twice to turn the dish- washer off without draining.
Water | Usage |
|
| |
|
| Auto Clean |
| I |
|
| Norma_l |
|
|
Rinse | Light |
|
| Heavy |
Only |
|
|
|
|
1 Fill | 2 Fills | 3 Fills | 4 Fills | 5 Fills |
2.1 | 4.1 | 6.0 | 8.0 | 9.9 |
gallons | gallons | gallons | gallons | gallons |
Options
Select Tough Scrub TMPlus when washing loads with
Tough Scrub "_ Plus can be selected with any cycle
(except Rinse Only). Depending on which cycle is being used, selecting Tough Scrub "_Plus adds fills, heat and/or wash time to the wash cycle.
For
gent (such as Cascade Plus or Electmsol Tabs*) is recom- mended.
indicator Lights
The SANITIZED light illuminates at the end of the cycle when conditions have been met to achieve sanitization.
The CLEAN light illuminates at the end of the cycle and remains lit until the door has been open for 30 seconds continuously.
The DRY light illuminates during the entire dry period and goes out when the cycle is completed.
The WASH light illuminates during all rinse and wash portions of the cycle.
The HEATING DELAY light illuminates when the cycle is being extended to heat the water.
The CLEAN and SANITIZED indicator lights will not re- illuminate after a power thilure until after the next cycle is
run.
* Brcmd t_ames are trademarks c_fthe respective manz(facture_:
6
