Maytag MDB9600AWW, MDB9600AWB, MDB8600AWS Component Specifications, Illustration, Test Procedure

Component Specifications

!WARNING

To avoid risk of electrical shock, personal injury, or death, disconnect power to dishwasher before servicing, unless testing requires power.

Illustration	Component	Test Procedure	Results
	Dishwasher Motor	Measure resistance from
		ST5 (Motor Common – blue) to ST8
	CCW rotation only	(Motor Main - yellow)	3 to 4 Ω
	viewed from shaft	See Component Specifications/Motor
	end.	Connections for details.
	1/3HP
	120V/60hz, 3.2 amps,
	3250 RPM
	Main Wattage, 285
	watts
	Start Wattage, 1115
	watts
	Control Board	See Component Specifications/
		Membrane Readings for
		troubleshooting/pin-out instructions.

Water valve	Measure resistance from
	J6 Pin 4 Aqua (Float switch) to ST4
120V/60hz, 7 watts	Black (Common)	1.1 k Ω
1.13 ± .10 gpm at 20-		(This value assumes the float switch is
120 psi		closed).

Vent wax motor	Measure resistance from J6 Pin 1
120V with 1/4"	Purple (Vent) to ST4 Black (Common) 1.2 k Ω
actuation stroke
within 60 seconds

Dispenser wax motor	Measure resistance from J6 Pin 3	2 k Ω
	Tan (Dispenser) to ST4 Black
120V with 1/4"	(Common).
actuation stroke
within 60 seconds

16023220	2	May 2004
		©2004 Maytag Services