Timer
The timer can be set from one minute (0:01) up to 99 hours and 59 minutes (99:59).
The timer can be used independently of any other oven activity. It can also be set while another oven function is operating.
The timer does not control the oven. It only controls a beeper.
To set the Timer:
1.Press the Timer pad.
• 0:00 lights in the display.
• The colon will flash.
2.Press the More+ or Less- pad until the correct time appears in the display.
•The colon will continue to flash.
3.Press Timer pad again or wait four seconds.
•The colon continues flashing and the time begins counting down.
•The last minute of the timer countdown will be displayed as seconds.
4.At the end of the set time, one long beep will sound.
To cancel the Timer:
1.Press and hold the Timer pad for three seconds.
OR
2.Press the Timer pad and set the time to 0:00.
Locking the Control
and Oven Door
The touchpad controls and oven door can be locked for safety, cleaning, or to prevent unwanted use. They will not function when locked.
If the oven is currently in use, the controls and door cannot be locked.
The current time of day will remain in the display when the controls are locked.
To lock:
Press and hold the CANCEL and Cook &
Hold pads for three seconds. (Press
CANCEL pad first.)
•LOCK flashes in the display.
To unlock:
Press and hold the CANCEL and Cook & Hold pads for three seconds. (Press CANCEL pad first.)
•LOCK disappears from the display.
Fault Codes
BAKE or LOCK may flash rapidly in the display to alert you if there is an error or a problem. If BAKE or LOCK flash in the display, press CANCEL pad. If BAKE or LOCK continue to flash, disconnect power to the appliance. Wait a few minutes,
and then reconnect power. If the flashing still continues, disconnect power to the appliance and call an authorized servicer.
Baking
To set Bake:
1. Press the Bake pad.
•BAKE will flash.
•000 will light in the display.
2. Select the oven temperature. The oven temperature can be set from 170° to 550°. Press or press and hold the More+ or Less- pad.
•350° will light when either pad is first pressed.
•Press the More+ pad to increase the temperature.
•Press the Less- pad to decrease the temperature.
3.Press Bake pad again or wait four seconds.
•BAKE will stop flashing and light in the display.
•100° or the actual oven temperature will display. The temperature will rise in 5° increments until the preset temperature is reached.
4.Allow the oven to preheat for
•When the set oven temperature is reached, one long beep will sound.
•To recall the set temperature during preheat, press the Bake pad.
5.Place food in the oven.
6.Check cooking progress at minumum cooking time. Cook longer if needed.
7.When cooking is finished, press
CANCEL pad.
8. Remove food from the oven.
Notes:
•To change the oven temperature during cooking, press the Bake pad and then the More+ or Less- pad until you reach the desired temperature.
•To change the oven temperature during preheat, press the Bake pad twice and then the More+ or Less- pad until you reach the desired temperature.
•If you forget to turn off the oven, it will automatically turn off at the end of 12 hours. If you wish to deactivate this feature, see page 16.
Baking Differences Between Your Old and New Oven
It is normal to notice some baking time differences between a new oven and an old one. See Adjusting the Oven Temperature on page 16.
13
