Remove 2 burner tube mounting screws and remove burner tube in order to gain access to the orifice.

Using a 3/8” wrench or socket, remove the existing orifice and replace it with an orifice from the kit.

Important

!Use extreme care when removing and replacing orifice (injector). This orifice (injector) is made of

brass, which is easily damaged.

Reinstall the burner tube onto the burner base.

For unregulated gases only, use a flat screwdriver to remove the regulator vent cap and install the blocking pin (P/N 140414) from the kit.

Install the gas train back into the dryer gas train enclosure. Be sure the tab at the rear of the gas train engages into the mounting slot.

Connect the union and the 3 electrical plugs. Repeat these steps for the other burner.

Affix L.P. Conversion Label (P/N 114515) to the dryer’s data label.

Complete L.P. Kit Conversion Confirmation Label (P/N 114083) and affix this label as close as possible to the dryer’s existing dryer rating (data) label/plate.

Non-CE Dryers

Affix L.P. Conversion Rating Label Addendum (P/N 114090) as close as possible to the dryer’s existing dryer rating (data) label/plate.

CE Dryers

Affix new data plate label that came with the conversion kit.

Open all shutoff valves, reconnect electrical power to the dryer, and test for leaks.

Important

!Never test for leaks with an open flame!!! Use a soapy water solution or product intended for that

purpose.

Unregulated Gas Valve

Regulate (govern) gas externally (refer to “Supply Pressure” in chart on page 14) to the correct gas pressure for the gas being used. Operate dryer through 1 complete cycle to ensure proper operation.

Regulated Gas Valve

Refer to “Gas Pressure Adjustment” on the following page to adjust the gas valve to the appropriate burner pressure listed on page 14.

Important

!Conversions done improperly can result in a fire or explosion!

Conversion from Propane or Butane Gas to Natural Gas

The following conversion allows the dryer to be operated with natural gas. If the dryer is setup for unregulated gas, a slight modification has to be done to the gas valve, to enable the internal regulator.

Parts Required for Conversion:

Description

P/N

Qty

Vent Cap

140415

2*

Burner Orifice (Injector)

**

2*

*This includes 1 for each pocket (tumbler).

**Refer to page 14 for orifice (injector) size.

Instructions

Disconnect electrical power to the dryer.

Close all shutoff valves (for both top and bottom tumbler) in dryer’s gas supply line.

Important

!The following procedures must be performed on both top and bottom tumblers.

Open the panels located just below each loading door.

Locate the gas train and disconnect the union, 3 electrical plugs, and the gas train mounting screws from the burner. Carefully slide the gas train out of the gas train enclosure. (The carbon ignitor located at the far end of the gas train is very fragile.)

Remove 2 burner tube mounting screws and remove burner tube in order to gain access to the orifice.

Using a 3/8” wrench or socket, remove the existing orifice and replace it with an orifice from the kit.

Important

!Use extreme care when removing and replacing orifice (injector). This orifice (injector) is made of

brass, which is easily damaged.

16

Maytag Co.

113413 - 10

Page 15 Page 17
Page 16
Image 16
Maytag MLG33 manual Non-CE Dryers, Unregulated Gas Valve, Regulated Gas Valve
Page 15 Page 17

MLG33 specifications

The Maytag MLG33 is a versatile and reliable washer dryer combo designed for those seeking efficient laundry solutions without compromising on performance. This model stands out for its unique blend of features and advanced technologies, making it an ideal choice for households with limited space.

One of the most notable characteristics of the MLG33 is its compact design, which allows it to fit seamlessly into smaller laundry areas without sacrificing capacity. With a generous wash capacity of 3.5 cu. ft., the MLG33 can handle a significant amount of laundry, accommodating everything from everyday clothes to larger items like bedding. This is particularly beneficial for urban residences or homes where space is at a premium.

The Maytag MLG33 is equipped with several cutting-edge technologies aimed at enhancing cleaning efficiency and fabric care. The PowerWash cycle uses a combination of powerful cleaning actions, including an extra wash action and a thorough rinse, to remove tough stains and ground-in dirt from clothes. This feature ensures that each load comes out impeccably clean, giving you peace of mind knowing that your laundry is being treated with utmost care.

Another essential feature is the dryer’s moisture sensing technology, which automatically detects when your clothes are dry and stops the cycle, thereby preventing over-drying. This not only saves energy but also helps to prolong the life of your garments by preventing excessive wear and tear.

Additionally, the MLG33 boasts a range of settings tailored to different fabric types, providing users with the flexibility to select the optimal cycle for their laundry needs. From delicate fabrics to heavy-duty loads, this model adapts accordingly to ensure the best possible results.

Ease of use is another standout aspect of the MLG33. The intuitive controls and large dial make it easy to navigate through various cycle options, while the clear digital display provides real-time updates on the washing and drying process.

Durability is a hallmark of the Maytag brand, and the MLG33 is no exception. Constructed with high-quality materials and components, it is designed to endure the rigors of everyday use, backed by a solid warranty that reflects the company's commitment to long-lasting performance.

In summary, the Maytag MLG33 washer dryer combo is an excellent choice for those seeking a reliable, efficient, and compact laundry solution. With its advanced features, thoughtful design, and proven durability, it delivers exceptional cleaning results while optimizing space in any home.
Top Page Image Contents