Installation Procedures _______________

Installation should be performed by competent professional in accordance with local, state, and country codes. In the absence of these codes, the installation must conform to applicable American National Standards: ANSI Z223.1-LATEST EDITION (National Fuel Gas Code) or ANSI/NFPA NO. 70- LATEST EDITION (National Electrical Code) or in Canada, the installation must conform to applicable Canadian Standards: CAN/CGA-B149.1-M91 (Natural Gas) or CAN/ CGA-B149.2-M91 (L.P. Gas) or LATEST EDITION (for General Installation and Gas Plumbing) or Canadian Electrical Codes Parts 1 & 2 CSA C22.1-1990 or LATEST EDITION (for Electrical Connections).

Location Requirements _______________

Before installing the dryer, be sure the location conforms to local codes and ordinances. In the absence of such codes or ordinances the location must conform with the National Fuel Gas Code ANSI.Z223.1 LATEST EDITION, or in Canada, the installation must conform to applicable Canadian Standards: CAN/CGA-B149.1-M91 (Natural Gas) or CAN/CGA-B149.2-M91 (L.P. Gas) or LATEST EDITION (for General Installation and Gas Plumbing).

The dryer must be installed on a sound level floor capable of supporting its weight. Carpeting must be removed from the floor area that the dryer is to rest on.

The dryer must not be installed or stored in an area where it will be exposed to water and/or weather.

Provisions for adequate air supply must be provided as noted in this manual (refer to Fresh Air Supply Requirements section).

Clearance provisions must be made from combustible construction as noted in this manual (refer to Dryer Enclosure Requirements section).

Provisions must be made for adequate clearances for servicing and for operation as noted in this manual (refer to Dryer Enclosure Requirements section).

The dryer must be installed with a proper exhaust duct connection to the outside as noted in this manual (refer to Exhaust Requirements section).

The dryer must be located in an area where correct exhaust venting can be achieved as noted in this manual (refer to Exhaust Requirements section).

Important

!The dryer should be located where a minimum amount of exhaust ducting will be necessary.

The dryer must be installed with adequate clearance for air openings into the combustion chamber.

Caution

!This dryer produces combustible lint and must be exhausted to the outdoors. Every 6 months,

inspect the exhaust ducting and remove any lint buildup.

Important

!The dryer must be installed in a location/ environment, which the ambient temperature

remains between 40° F (4.44° C) and 130° F (54.44° C).

Unpacking/Setting Up _________________

Remove protective shipping material (i.e., plastic wrap and optional shipping box) from the dryer.

Think safety when transporting and handling this dryer.

When handling this dryer during uncrating and/or installation, keep in mind its weight and center of gravity. Use of an appliance hand truck with auxiliary wheel set is recommended. Use proper lifting techniques to avoid injury. When in doubt, use help in handling heavy appliances.

Important

!Dryer must be transported and handled in an upright position at all times.

The dryer can be moved to its final location while still attached to the skid or with the skid removed. To remove the skid from the dryer, locate and remove the two bolts securing the base of the dryer to the wooden skid. One is located at the center rear and the other is at the center front.

With the skid removed, use caution and assure all four leveling legs are fully retracted if the dryer is to be slid into its final position.

Leveling Dryer

The dryer is equipped with four leveling legs, one at each corner of the base. For optimum performance the dryer should be level front-to-back and side-to-side.

Dryer Enclosure Requirements _______

Bulkheads and partitions should be made of noncombustible material.

Note

!Allowances must be made for opening the control door.

AThe requirement to allow the door to open completely is 33-inches (83.8 cm).

BA minimum overhead clearance of 6-inches (15.24 cm) is required.

CDryer should be positioned a minimum of 12-inches (30.48 cm) away from the nearest obstruction. 24-inches (60.96 cm) is recommended for ease of installation, maintenance, and service.

D1/16” (1.5875 mm) minimum is required.

EFlooring should be level or below dryer cabinet for ease of removing panels during maintenance.

FDryers may be positioned sidewall to sidewall, however a 1/16” (1.5875 mm) minimum allowance must be made for the opening and closing of the control door, along with the removal of panels during maintenance.

8

Maytag Co.

113413 - 10

Page 7 Page 9
Page 8
Image 8
Maytag MLG33 manual Installation Procedures, Location Requirements, Unpacking/Setting Up, Dryer Enclosure Requirements
Page 7 Page 9

MLG33 specifications

The Maytag MLG33 is a versatile and reliable washer dryer combo designed for those seeking efficient laundry solutions without compromising on performance. This model stands out for its unique blend of features and advanced technologies, making it an ideal choice for households with limited space.

One of the most notable characteristics of the MLG33 is its compact design, which allows it to fit seamlessly into smaller laundry areas without sacrificing capacity. With a generous wash capacity of 3.5 cu. ft., the MLG33 can handle a significant amount of laundry, accommodating everything from everyday clothes to larger items like bedding. This is particularly beneficial for urban residences or homes where space is at a premium.

The Maytag MLG33 is equipped with several cutting-edge technologies aimed at enhancing cleaning efficiency and fabric care. The PowerWash cycle uses a combination of powerful cleaning actions, including an extra wash action and a thorough rinse, to remove tough stains and ground-in dirt from clothes. This feature ensures that each load comes out impeccably clean, giving you peace of mind knowing that your laundry is being treated with utmost care.

Another essential feature is the dryer’s moisture sensing technology, which automatically detects when your clothes are dry and stops the cycle, thereby preventing over-drying. This not only saves energy but also helps to prolong the life of your garments by preventing excessive wear and tear.

Additionally, the MLG33 boasts a range of settings tailored to different fabric types, providing users with the flexibility to select the optimal cycle for their laundry needs. From delicate fabrics to heavy-duty loads, this model adapts accordingly to ensure the best possible results.

Ease of use is another standout aspect of the MLG33. The intuitive controls and large dial make it easy to navigate through various cycle options, while the clear digital display provides real-time updates on the washing and drying process.

Durability is a hallmark of the Maytag brand, and the MLG33 is no exception. Constructed with high-quality materials and components, it is designed to endure the rigors of everyday use, backed by a solid warranty that reflects the company's commitment to long-lasting performance.

In summary, the Maytag MLG33 washer dryer combo is an excellent choice for those seeking a reliable, efficient, and compact laundry solution. With its advanced features, thoughtful design, and proven durability, it delivers exceptional cleaning results while optimizing space in any home.
Top Page Image Contents