Drying times

It is impossible to give exact drying times. Conditions from home to home vary and directly affect drying times. The length of time it takes to dry loads will depend on several variables.

Load size.

Type of fabric, washer and spin speed will determine moisture in the fabric.

Heat and moisture in the room. Damp air coming into the dryer will increase drying time.

• Installation (length of exhaust duct,

depending on the moisture content of

etc.).

the clothes.

• Electric voltage or gas pressure.

• Do not set the timer for a “higher” set-

If you have an automatic cycle, you need

ting than necessary. If you have a per-

manent press/knit cycle, use it for

not worry about time. The automatic cycle

loads of permanent press, knits, and

will determine the time needed.

for clothes made from, or containing

Here are some important items to remem-

synthetic fibers. This cycle has a

ber:

longer COOL DOWN period at the end

• In some models, the automatic cycle

of the cycle to reduce wrinkling.

 

does not operate as a timed cycle.

 

While using this feature, the cycle dial

 

advances as the clothes dry. The dial

 

may advance slowly or quickly

 

CARE AND CLEANING

Cleaning

Ordinarily, dryer cylinder will need no care.

Wipe dryer cabinet as needed. If deter- gent, bleach or other washing products have been spilled on the dryer, wipe immediately. Some products will cause permanent damage if spilled on the cabinet.

Do not allow sharp or rough objects to lean against the dryer. The finish could be damaged.

Use only a damp or sudsy cloth for cleaning the control panel. Some spray prewash products may harm the finish on the control panel.

How to Remove Ball Point Pen Ink Marks from the Dryer Drum

If the ink stain is fresh, place dry rags in the dryer. Using the hottest heat set- ting, run the dryer for one hour to absorb the ink.

If the stain is not fresh, apply house- hold spray or cream cleaner to a soft cloth, and rub the stain. Then, place wet rags in the dryer. Using the hottest heat setting, run the dryer for one hour to remove any cleaner residue.

Lubrication

All moving parts are sealed in a perma- nent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary.

Exhaust system

The exhaust duct should be inspected after one year of use and cleaned if necessary. Inspect and clean exhaust duct every one to two years as required thereafter.

The weather hood should be checked frequently to make sure the dampers move freely, dampers are not pushed in and that nothing has been set against them.

Keep dryer area clear and free from combustible materials, gasoline and other flammable vapors and liquids.

Do not obstruct the flow of combustion (gas dryers) and ventilation air.

6

Page 7
Image 7
Maytag SDE/G4000 warranty Drying times, Cleaning, Lubrication, Exhaust system

SDE/G4000 specifications

The Maytag SDE/G4000 is a remarkable addition to the lineup of Maytag appliances, designed to deliver reliability, efficiency, and innovative technology for homeowners. With a commitment to performance and durability, the SDE/G4000 stands out in the realm of dryers, catering to diverse laundry needs while ensuring that garments are treated with care.

One of the main features of the Maytag SDE/G4000 is its impressive drying capacity. With a spacious drum that can accommodate large loads, this dryer allows users to dry more clothes in a single cycle, significantly reducing overall laundry time. This feature is particularly beneficial for families or those who frequently wash bulky items like bedding and towels.

In addition to its capacity, the SDE/G4000 is equipped with advanced drying technologies. One notable innovation is the Optimal Dry™ technology, which uses moisture sensors to monitor the dryness level of clothes. This ensures that items are dried evenly and efficiently, preventing over-drying, which can cause garments to wear out more quickly. By adapting drying times based on real-time moisture levels, the dryer optimizes energy usage and prolongs the life of the fabrics.

Another characteristic that sets the Maytag SDE/G4000 apart is its robust construction. Built with a heavy-duty motor and high-quality materials, this dryer is designed to withstand the rigors of daily use. The commercial-grade components ensure dependable operation, allowing users to rely on the SDE/G4000 for years to come.

The SDE/G4000 also focuses on user convenience, featuring multiple drying cycles and temperature settings tailored to various fabric types. From delicate items that require a gentle touch to heavy-duty fabrics that benefit from high heat, the dryer is equipped to handle it all. Additionally, the end-of-cycle signal alerts users when laundry is done, ensuring that clothes are removed promptly to prevent wrinkles.

In terms of aesthetics, the Maytag SDE/G4000 combines functionality with modern design, making it a pleasing addition to any laundry room. Its sleek exterior and intuitive controls enhance the user experience while maintaining a stylish appearance.

In summary, the Maytag SDE/G4000 is a feature-rich dryer that emphasizes capacity, efficiency, and durability. With technologies like Optimal Dry™ and a focus on user convenience, it is an excellent choice for anyone seeking a reliable appliance to tackle their laundry needs.