Sunbeam EM8910 Cleaning the coffee brewing unit continued, Inserting the coffee brewing unit

Cleaning the coffee brewing unit (continued)

Figure 50

Figure 51 3

2

1

•Dry the coffee brewing unit and turn the service lever upwards again as far as it will go. The ejection lever folds back again and the brewing unit closes. See figure 55.

Inserting the coffee brewing unit

•Re-insert the coffee brewing unit as follows:

1.Place the coffee brewing unit onto the guide bar and push the coffee brewing unit into the machine as far as it will go, see figure 56.

2.Press the locking button down and push the coffee brewing unit further in for approximately 1cm until the locking button clicks into place, see figure 57.

3.Press the locking lever down as far as it will go, see figure 57.

•Close the service door and re-insert the coffee waste container.

Note: The Sunbeam Intuitive Digital can only be switched on if the service door is closed. After switching on, the coffee brewing unit re-adjusts itself, the normal heating process starts again.

Figure 52

Figure 53

34