Grind setting selection
Important: Only adjust the fineness of the grind during the grinding process. Adjustments of the grind while not in use may cause damage to the espresso machine.
Setting the fineness of the grind
•With a cup placed under the espresso pour
spout, press the one cup coffee button. While the grinding process is running, adjust the fineness of the grind using the ‘coffee grind selector’ lever. See figure 35.
Figure 35
Figure 36
Removing foreign matter from the grinding mechanism
Foreign matter in the grinder, e.g. small stones or wood chips, may cause damage to the grinding mechanism.
The Sunbeam Intuitive Digital is designed with a ‘stone safety device’ which, in case of foreign matter, causes an even, loud rattling. If you should hear this noise during grinding, switch the espresso machine off immediately and remove the foreign matter as follows:
Cleaning the grinding mechanism
•Switch the espresso machine off by pressing the ‘POWER’ button and unplug the power cord from the power outlet.
•Turn the ‘coffee bean hopper’ to the position marked ‘HOPPER RELEASE’ and take it off. See figure 36.
•Remove any coffee beans in the grinding mechanism. We suggest using the cleaning brush supplied with the Sunbeam Intuitive Digital (or, possibly a vacuum cleaner with a hose or nozzle). See figure 37. If any foreign matter cannot be removed, proceed with the next step.
•Slide the ‘grinding mechanism release’ button to the front in the direction of the grinding mechanism. Hold this position and turn the ‘coffee grind’ lever clockwise by approximately 1 revolution up to the stop. See figure 38.
•Now detach the grinding ring by lifting it out and remove any foreign matter(s). See figure 39.
Important: There is risk of injury by turning grinding gear. Never switch the espresso machine on while working with the grinding mechanism. This may cause severe injury. Always unplug the power cord from the power outlet.
26