Running the descaling program (continued)
Figure 63
Figure 64
• <<PLEASE WAIT>>
The coffee brewing unit is positioned.
•<<WASTE CONTAINER UNDER STEAM WAND>> – press “OK”
Remove and empty the coffee waste container. Place the emptied coffee waste container under the steam wand, see figure 62. Then press the “OK” button.
Note: The container serves as a collecting vessel for the descaling solution.
• <<OPEN STEAM SWITCH>>
Turn the selection dial for the steam and hot water functions to the setting. The descaling program starts. See figure 63.
Note: During the descaling program the display shows the following indications alternately:
• <<DESCALING CYCLE>>
The program carries out 14 rinses. The pauses allow the descaling solution to take effect. The rinsing cycles are counted off in the display.
• <<IN PROGRESS>>
The bar indication in the bottom line increases with the advance of the pause duration.
The display shows the following at the end of the last rinsing:
• <<CLOSE STEAM SWITCH>>
Turn the selection switch for the steam and hot water back to the off position. See figure 64.
•<<EMPTY WASTE CONTAINER>>
– Press “OK”
Empty the coffee waste container. Then press the “OK” button.
•<<WASTE CONTAINER UNDER STEAM WAND>>
– press “OK”
Place the emptied coffee waste container under the steam wand. Then press the “OK” button.
•<<RINSE AND REFILL WATER RESERVOIR>> – press “OK”
Remove the water reservoir, rinse it thoroughly, fill with fresh water and replace. Then press the “OK” button.
The espresso machine is now ready to be rinsed with fresh water.
• <<OPEN STEAM SWITCH>>
Turn the selection dial for the steam and hot water functions to the setting. A rinsing with fresh water is carried out.
•<<RINSING PLEASE WAIT>>
•<<CLOSE STEAM SWITCH>>
39
