Making an espresso with pre-ground coffee (continued)
Selecting espresso pour volume/size
Depending on your taste, select a short, standard or a long espresso pour.
•For this press the 'espresso pour volume' button until the desired cup symbol is selected or the desired cup size is indicated on the display. See figure 22.
The cup sizes are indicated as follows:
20mLs 
<<SMALL VOLUME>>
30mLs 
<<MEDIUM VOLUME>>
40mLs 
<<LARGE VOLUME>>
NOTE: The bottom line on the display shows the coffee strength/quantity. The procedure for changing this is explained in the following section.
NOTE: The Sunbeam Intuitive Digital is set to standard volumes. Instructions for changing the set coffee volumes can be found in section "Programming the espresso pour volume: on page 24.
Setting the number of cups and dispensing coffee
•Place one or two cups under the espresso pour spouts. The height of the pour spouts can be adjusted to suit the height of your cup to reduce heat loss and espresso splashes. Simply slide the espresso pour spouts up or down. See figure 23.
•Press the 
button once or twice in order to select 1 or 2 cups. See figure 24. LCD: Indicates <<1 CUP>> or
<<2 CUPS>>.
•Press the "OK" button.
•The espresso is now made.
Figure 22
Figure 23
Figure 24
17
