Care and cleaning (continued)
Cleaning the grinder
•Switch the espresso machine off by pressing the ‘POWER’ button and unplug the power cord from the power outlet.
•Turn the ‘coffee bean hopper’ to the position marked ‘HOPPER RELEASE’ and take it off. See figure 43.
•Remove any coffee beans in the grinding mechanism. We suggest using the cleaning brush supplied with the Sunbeam Intuitive Digital (or, possibly a vacuum cleaner with a hose or nozzle). See figure 44. If any foreign matter cannot be removed, proceed with the next step.
•Slide the ‘grinding mechanism release’ button to the front in the direction of the grinding mechanism. Hold this position and turn the ‘coffee grind’ lever clockwise by approximately 1 revolution up to the stop. See figure 45.
Figure 43 
Figure 45
•Now detach the grinding ring by lifting it out and remove any foreign matter(s).
See figure 46.
Important: There is risk of injury by turning grinding gear. Never switch the espresso machine on while working with the grinding mechanism. This may cause severe injury. Always unplug the power cord.
•Replace the grinding ring.
•Slide the ‘grinding mechanism release’ button to the front in the direction of the grinding mechanism. Hold this position and turn the ‘coffee grind’ lever
•Replace the ‘coffee bean hopper’ in position ‘HOPPER RELEASE’ and turn it to the 
coffee beans position. Now test the function of the grinding mechanism with a small quantity of beans and make a cup of coffee.
Figure 44
Figure 46
32
