Using the Sunbeam Intuitive Digital
Prior to switching on each time, make sure there is water in the water reservoir and replenish if necessary. As the machine requires water for the automatic rinsing cycles with each switching on and switching off process.
Filling the machine
•Slide out and remove the water reservoir from the machine. See figure 5.
•Fill the water reservoir always with fresh, cold water. See figure 6.
Note: Fill only cold water into the water reservoir. Never fill with other liquids, such as mineral water or milk.
•Replace the water reservoir. Slide the water reservoir in and press firmly into place to ensure that the valve of the water reservoir opens. See figure 7.
Figure 5
Note: If the water reservoir is not correctly in position or if water needs to be refilled while the espresso machine is in operation, the water indicator 
illuminates and the display indicates <<FILL WATER RESERVOIR>>. Making coffee will not be possible or the cycle will be interrupted.
Switching on the machine
•Turn the power on at the power outlet and switch the espresso machine on by pressing the ‘POWER’ button on the control panel. See figure 8.
LCD: Indicates briefly <<Sunbeam Intuitive>>
Figure 7
Figure 6 | Figure 8 |
10 |
|
