Setting the water hardness
Prior to first use the Sunbeam Intuitive Digital should be adjusted to the relevant degree of water hardness for your region. Water hardness refers to the mineral content of your local water supply. You may determine the hardness degree using the supplied test strips.
Determining water hardness
•Dip the test strip into cold water for 1 second. Shake off the excess water and the degree of water hardness is determined according to the number of
Hardness degree
1 | 2 | 3 | 4 |
soft | medium | hard | very hard |
•With the machine switched on, press the "MENU" button.
LCD: Indicates <<LANGUAGE>>.
• Press the scrolling keys | ▼ or ▼ until the |
LCD indicates <<WATER HARDNESS>>. See figure 10.
•Confirm your selection by pressing the "OK" button. See fugure 11.
LCD: Indicates current setting eg. <<HARDNESS LEVEL 3>>
• Then press the scrolling keys ▼ or ▼ until the desired hardness level is displayed. See figure 10.
•Confirm the selection with the "OK" button. See figure 11.
Note: After programming the LCD returns
Test strips
Setting and saving the water hardness level
You can set 4 hardness levels. The Sunbeam Intuitive Digital is factory set to hardness level 3.
Figure 10
automatically to the menu point <<HARDNESS LEVEL 3>>
•To return to normal operating mode, press the "MENU" button.
Note: If you have not made a selection within 30 seconds the machine automatically returns to the normal operating mode.
Figure 11
12
