VMH Inverter | OWNER’S MANUAL | Heat Controller, Inc. |
CARE AND MAINTENANCE
3.Remove the AIR FILTER from the indoor unit.
•Clean the AIR FILTER once every two weeks.
•Clean the AIR FILTER with a vacuum cleaner or with water, then dry it in a cool place
4.Remove the Air Freshening Filter (optional filters: plasma dust col- lector/silver ion filter/bio filter/vitamin C filter) from it support frame. The installation and removing method of the air freshening filter is different depending on the models. See the pictures marked 1 and 2 on the left.
•Clean the air freshening filter at least once a month, and re- place it every
•Clean it with a vacuum cleaner, then dry it in a cool place.
5.Install the air freshening filter back into position.
6.Insert the upper portion of the air filter back into the unit taking care that the left and right edges line up correctly when placing filter into position.
Maintenance
If you do not plan on use the unit for a long period of time:
1.Clean the indoor unit and air filter.
2.Select FAN only mode, let the indoor fan run for a while to dry the inside of the unit.
3.Disconnect the power supply and remove the batteries from the remote controller.
4.Check components of the outdoor unit periodically. Contact a local dealer or an authorized servicer if the unit requires servicing.
NOTE: Before you clean the air conditioner, be sure to switch the unit off and disconnect the power supply.
When the air conditioner is to be used again:
•Use a dry cloth to wipe off the dust accumulated on rear air intake grille in order to avoid the dust blowing out from the outdoor unit.
•Check that the wiring is not broken off or disconnected.
•Check that the air filter is installed.
•Check if the air outlet or inlet is blocked after the air conditioner has not been used for a long time.
9
