Maytag W10092682 manual Location Requirements, Drain System

Models: W10092682

1 60
Download 60 pages 35.64 Kb
Page 5
Image 5

Tools needed for installation:

Adjustable or open end wrench ⁹⁄₁₆" (14 mm)

Level

Wood block

Ruler or measuring tape

Pliers that open to 1⁹⁄₁₆" (3.95 cm)

Flashlight (optional)

A level floor with a maximum slope of 1" (2.5 cm) under entire washer. Installing the washer on carpeting is not recommended.

A sturdy floor to support the washer weight (washer, water and load) of 315 lbs (143 kgs).

Do not store or operate your washer in temperatures at or below 32°F (0°C). Some water can remain in the washer and can cause damage in low temperatures. See “Washer Care.”

Alternate Parts

Your installation may require additional parts. For information on ordering, please refer to the toll-free phone numbers on the front page of the Use and Care Guide.

If You Have:

You Will Need to Buy:

Recessed area or closet installation

The dimensions shown are for the recommended spacing allowed (A and B), except the closet door ventilation openings. The dimensions shown for the closet door ventilation openings (C) are the minimum required.

Laundry tub or standpipe

Sump pump system (if not already available)

taller than 96" (2.4 m)

 

 

 

1" (2.5 cm) diameter

1¹⁄₄" (3.2 cm) diameter to 1" (2.5 cm) diameter standpipe

standpipe

adapter, Part Number 280130

 

 

Overhead sewer

Standard 20 gal. (76 L) 39" (99 cm) tall drain tub or utility

 

sink, sump pump and connectors (available from local

 

plumbing suppliers)

 

 

Floor drain

Siphon break kit, Part Number 280129; additional drain hose,

 

Part Number 3357090

19" (48.3 cm)

0"

 

27"

 

(0 cm)

(68.6 cm)

 

 

 

 

3"

 

 

14" max.

48 in.2

(7.6 cm)

 

 

 

 

 

(35.6 cm)

(310 cm 2 )

 

 

 

 

2

 

 

 

 

24 in.

3"

 

 

 

(155 cm2 )

 

 

 

 

(7.6 cm)

0"

1"

25¹⁄₂"

4"

 

(0 cm)

(2.5 cm)

(64.8 cm)

(10.2 cm)

 

Water faucets beyond

2 longer water fill hoses:

reach of fill hoses

6 ft (1.8 m) Part Number 76314,

 

10 ft (3.0 m) Part Number 350008

 

 

Drain hose too short

Kit Part Number 280131

 

 

Lint clogged drain

Drain protector, Part Number 367031

LOCATION REQUIREMENTS

Selecting the proper location for your washer improves performance and minimizes noise and possible washer “walk.”

Your washer can be installed in a basement, laundry room, closet, or recessed area. See “Drain System.”

IMPORTANT: Do not install or store the washer where it will be exposed to the weather. Proper installation is your responsibility.

You will need:

A water heater set to deliver 120°F (49°C) water to the washer.

A grounded electrical outlet located within 4 ft (1.2 m) of where the power cord is attached to the back of the washer. See “Electrical Requirements.”

Hot and cold water faucets located within 3 ft (90 cm) of the hot and cold water fill valves, and water pressure of 5-100 psi (34.5-690 kPa). Washers with triple dispensers require 20-100 psi (138-690 kPa) for best performance.

ABC

A. Front view

B. Side view

C. Closet door with vents

Additional spacing should be considered for ease of installation and servicing.

Additional clearances may be required for wall, door and floor moldings.

Additional spacing of 1" (2.5 cm) on all sides of the washer is recommended to reduce noise transfer.

If a closet door is installed, the minimum air openings in the top and bottom of the door are required (C). Louvered doors with air openings in the top and bottom are acceptable.

Companion appliance spacing should also be considered.

DRAIN SYSTEM

The washer can be installed using the standpipe drain system (floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need. See “Tools and Parts.”

Standpipe drain system—wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute. A 1¹⁄₄" (3.2 cm) diameter to 1" (2.5 cm) diameter standpipe adapter kit is available. See “Tools and Parts.”

The top of the standpipe must be at least 39" (99 cm) high and no higher than 96" (244 cm) from the bottom of the washer.

5

Page 5
Image 5
Maytag W10092682 manual Location Requirements, Drain System

W10092682 specifications

The Maytag W10092682 is a stellar appliance that prides itself on efficiency and durability, making it a popular choice among homeowners looking for a reliable cooking companion. This high-quality wall oven integrates advanced features with user-friendly technology, embodying the core values synonymous with the Maytag brand.

One of the standout features of the W10092682 is its spacious interior. With a generous capacity, it allows users to bake larger items or multiple dishes at once, cutting down on meal preparation time. This means that family gatherings and holiday cooking can be less of a hassle, as this oven can accommodate larger trays and multiple racks.

The self-cleaning function is a highlight, saving you time and effort. This technology steam cleans or uses high-temperature settings to eliminate food residue, leaving the oven clean with minimal manual scrubbing. This practicality ensures that even after heavy use, the oven remains in pristine condition, contributing to its longevity.

Another significant technology integrated into the Maytag W10092682 is its advanced temperature management system. This ensures even heat distribution throughout the oven, preventing cold spots and ensuring perfect cooking and baking results every time. The precision of this system allows cooks to have confidence in their culinary endeavors, knowing that dishes will be cooked uniformly.

The oven also comes with user-friendly controls, including intuitive knobs and digital displays. Preset functions catered to various cooking styles simplify the cooking process, while temperature probes allow for accurate monitoring of meat conditions without needing to open the oven door.

Additionally, the Maytag W10092682 boasts durable construction with robust materials designed to handle daily wear and tear. Its sleek stainless steel finish not only provides aesthetic appeal but also makes for easy cleaning and maintenance.

Overall, the Maytag W10092682 stands out in the crowded market of wall ovens through its combination of capacity, advanced cleaning technologies, temperature precision, and sturdy design. Whether you're roasting, baking, or using it for everyday meals, this wall oven promises to deliver consistent results that stand the test of time. It’s an investment in quality that will enhance any kitchen and streamline cooking tasks for years to come.