| 3. Press POWER/CANCEL |
| 5. Setting modifiers | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press the POWER/CANCEL button to turn on the dryer.
4. Select the desired cycle
Select the desired cycle for your load. See the “Cycle Guide” or the display for more information about each cycle.
The default cycle settings will be shown. For some cycles,
you may select alternate settings by pressing the button for that setting. Time adjusts for Manual Cycles only.
NOTE: Not all modifiers are available with all cycles.
Temp Level (for use with Timed Cycles only)
Press the TEMP LEVEL button to change the drying temperature from the default setting. Press the (+) for more time or
Dryness Level (for use with Sensor Cycles only)
Normal dryness level is a good starting point for optimal energy savings.
You can select a different dryness level, depending on your load, by pressing the button for More, Normal, or Less. Selecting More, Normal, or Less automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle.
Sensor Dry cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.
NOTE: More Dry removes more load moisture. Normal Dry is used for a starting point for sensor drying. Less Dry removes less moisture and used for loads you may want to put on a hanger to complete drying.
Wrinkle Prevent feature
nGet up to 60 or 150 minutes for models with two choices, 90 minutes for models with only one choice of
nThe WRINKLE PREVENT feature is preset to “OFF.” If selected for other cycles, the WRINKLE PREVENT feature setting will remain “ON” the next time that cycle is selected.
8
