Venting Requirements, Burner input requirements

■³⁄₈" approved aluminum or copper tubing is acceptable for lengths under 20 ft (6.1 m) if local codes and gas supplier permit.

■If you are using Natural gas, do not use copper tubing.

■Lengths over 20 ft (6.1 m) should use larger tubing and a different size adapter fitting.

■If your dryer has been converted to use LP gas, ³⁄₈" LP compatible copper tubing can be used. If the total length of the supply line is more than 20 ft (6.1 m), use larger pipe.

NOTE: Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape.

■Must include a shutoff valve:

An individual shutoff valve must be installed within 6 feet

(1.8 m) of the dryer in accordance with the National Fuel Gas Code, ANSI Z223.1. The location should be easy to reach for opening and closing.

AC E

A. ³⁄₈" flexible gas connector

B. ³⁄₈" pipe to flare adapter fitting

C. ¹⁄₈" NPT minimum plugged tapping

D. ½" NPT gas supply line

E. Gas shutoff valve

Gas supply connection requirements

■Use an elbow and a ³⁄₈" flare x ³⁄₈" NPT adapter fitting between the flexible gas connector and the dryer gas pipe, as needed to avoid kinking.

■Use only pipe-joint compound. Do not use TEFLON®† tape.

■This dryer must be connected to the gas supply line with a listed flexible gas connector that complies with the standard for connectors for gas appliances, ANSI Z21.24.

Burner input requirements

Elevations above 10,000 ft (3,048 m):

■When installed above 10,000 ft (3,048 m) a 4% reduction of the burner Btu rating shown on the model/serial number plate is required for each 1,000 ft (305 m) increase in elevation.

Gas supply pressure testing

■The dryer must be disconnected from the gas supply piping system during pressure testing at pressures greater than ½ psi.

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

Dryer Gas Pipe

■The gas pipe that comes out through the rear of your dryer has a ³⁄₈" male pipe thread.

6¼"					B
6¼"					B
(15.88 cm)

	A	1½"
	A	(3.81 cm)
		(3.81 cm)

A. ½" NPT gas supply line

B. ³⁄₈" NPT dryer pipe

Venting Requirements

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS.

IMPORTANT: Observe all governing codes and ordinances.

The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling or a concealed space of a building.

W10155112A, W10155111A specifications

Maytag is a well-known brand in the appliance industry, recognized for its commitment to quality, performance, and innovation. Among its extensive lineup, the Maytag W10155111A and W10155112A stand out as reliable options for consumers in need of efficient appliance solutions. These products are designed to enhance home efficiency while providing durability and functionality.

The Maytag W10155111A is a replacement part that is primarily used in Maytag washers, specifically the tub seal. It ensures that the washing machine operates smoothly by preventing water leaks from the tub during the washing cycle. This component is crucial for maintaining the integrity of the appliance, leading to better washing performance and preventing potential water damage to the surrounding areas.

On the other hand, the W10155112A is another essential component that functions as a washer. It is designed to work in conjunction with various washing machines to provide optimal performance. This part is engineered to withstand high-pressure conditions and is made from high-quality materials that ensure longevity. The combination of these components contributes to more efficient washing cycles, reducing water usage and energy consumption, thereby offering environmental benefits alongside practicality.

A notable feature of both components is their compatibility with a wide range of Maytag washer models, making them versatile choices for homeowners. Additionally, their easy installation process allows users to replace worn-out parts with minimal effort, saving time and repair costs. Maintenance is also simplified, as these parts are designed for easy access and replacement.

In terms of technology, Maytag emphasizes durability and reliability. The materials used in the manufacturing of these components are carefully selected to withstand the rigors of daily use, ensuring that they can handle a variety of laundry loads without compromising performance.

Overall, the Maytag W10155111A and W10155112A exemplify the brand's dedication to quality and consumer satisfaction. These components not only enhance the performance of Maytag washing machines but also contribute to the long-term efficiency and durability of the appliance. With their ease of installation and reliable performance, these parts are ideal for anyone looking to maintain their washing machine in prime condition. Investing in these components means choosing reliability and efficiency for a modern laundry experience.

Maytag W10155112A manual Venting Requirements, Gas supply connection requirements, Dryer Gas Pipe

Models: W10155112A W10155111A