Style 2
Recommended Setting “4”
To Turn Off/On:
Style 1 Press the freezer down arrow touch pad until a
dash
Style 2 Turn the freezer control to the word OFF. Neither compartment will cool when the freezer is set to OFF.
Humidity Control
The humidity control turns on a heater to help reduce moisture on the door hinge seal. Use in humid environments or when you notice moisture on the door hinge seal. The refrigerator uses more energy when Humidity Control is on.
■Press the control to ON when the environment is warm and more humid, or if you notice moisture on the door hinge seal.
■Press the control to OFF to save energy when the environment is less humid.
Adjusting Controls
If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart below as a guide.
For (Style 1) controls press the up or down arrow touch pads, or for (Style 2) controls turn the dial to adjust the temperature. Except when starting the refrigerator, do not adjust either control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize.
CONDITION/REASON: | ADJUSTMENT: |
|
|
REFRIGERATOR too warm | REFRIGERATOR |
| Control one setting |
| higher |
|
|
FREEZER too warm/too little ice | FREEZER Control one |
| setting higher |
|
|
REFRIGERATOR too cold | REFRIGERATOR |
| Control one setting |
| lower |
|
|
FREEZER too cold | FREEZER Control one |
| setting lower |
Digital Controls
For your convenience, your temperature controls are preset at the factory. When you first install your refrigerator, make sure the controls are still set to the Initial settings as shown.
Initial Settings
IMPORTANT: When the power is on, the temperature display shows the set point temperature of the compartment.
To Turn Your Refrigerator Off/On:
■Press both the freezer and refrigerator (+) touch pads repeatedly until “OFF” appears in the displays. Allow a few seconds for the refrigerator to shut off. Neither compartment will cool.
■Press both the refrigerator and freezer
Adjusting Digital Controls
The REFRIGERATOR control adjusts the refrigerator compartment temperature. The FREEZER control adjusts the freezer compartment temperature.
If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart as a guide.
To Adjust Set Point Temperatures:
The first touch of the (+) or
■Press the (+) or
NOTE: Except when first turning on the refrigerator, do not adjust either temperature control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize.
CONDITION/REASON: | ADJUSTMENT: |
|
|
REFRIGERATOR too warm | Adjust REFRIGERATOR |
| Control 1° lower |
|
|
FREEZER too warm/too little ice | Adjust FREEZER |
| Control 1° lower |
|
|
REFRIGERATOR too cold | Adjust REFRIGERATOR |
| Control 1° higher |
|
|
FREEZER too cold | Adjust FREEZER |
| Control 1° higher |
Additional Digital Control Center Features
Fast Cool
The Fast Cool feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures.
■Press the Fast Cool touch pad to set the freezer and refrigerator to the lowest temperature settings. Press the Fast Cool touch pad again to return to the normal refrigerator set point.
NOTE: The Fast Cool feature will automatically shut off in approximately 12 hours.
13
