Off-taste, odor or gray color in the ice

 

The water dispenser will not operate properly

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture-proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing.

The ice dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice stuck in the delivery chute? Use a plastic utensil to clear the delivery chute.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Kink in the home water source line? Straighten the water source line.

■New installation? Flush and fill the water system.

■Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

■Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements.”

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser for 2 to 3 seconds after releasing the dispenser lever/pad.

■New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

■Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough (on some models)

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

ACCESSORIES

To order stainless steel cleaner or replacement filters, call

1-800-688-9900and ask for the appropriate part number listed below or contact your authorized MAYTAG® Appliances dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

Standard Base Filter Cartridge:

Order Part #4396841 (T2RFWG2 and P2RFWG2)

11

Page 10 Page 12
Page 11
Image 11
Maytag W10237807A, W10216883A Accessories, Ice dispenser will not operate properly, Water is leaking from the dispenser
Page 10 Page 12

W10237807A, W10216883A specifications

Maytag has long been synonymous with durability and innovation in the appliance industry, and their components, such as the W10216883A and W10237807A, exemplify the brand's commitment to quality and efficiency. These parts are designed to enhance the performance of Maytag appliances, offering reliability that consumers have come to expect.

The Maytag W10216883A is primarily known as a door seal that fits various Maytag models. This component plays a critical role in maintaining the efficiency of refrigerators by preventing cold air from escaping and minimizing the workload on the appliance's cooling system. The high-quality construction of the seal ensures it can withstand daily use while effectively preventing leaks, leading to energy savings and a more consistent internal temperature. Its easy installation process allows homeowners to replace this part without the need for professional help, ensuring that their refrigerator continues to operate as intended for years.

On the other hand, the Maytag W10237807A is a water filter that provides an essential function in maintaining clean and fresh drinking water. This filter reduces contaminants, including chlorine taste and odor, ensuring that the water dispensed from the refrigerator is safe and pleasant to drink. The W10237807A features advanced filtration technology that targets impurities while preserving beneficial minerals. Regular replacement of this water filter is crucial, as it guarantees that the water quality remains high and supports the overall health of the household.

Both components reflect Maytag's focus on integrating modern technologies to enhance user experience. The durable materials used in the construction of these parts ensure they can withstand the rigors of daily use, while innovative designs allow for easy installation and replacement.

Additionally, these Maytag parts contribute to the overall longevity of appliances, ensuring that customers get the most value from their investments. With consumer-friendly features and reliable performance, the W10216883A and W10237807A truly embody the brand's dedication to superior quality and efficiency in home appliances. By choosing genuine Maytag components, homeowners can maintain optimal performance and prolong the life of their appliances.
Top Page Image Contents