OVEN USE

Odors and smoke are normal when the oven is used the first few times, or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well- ventilated room.

Electronic Oven Controls

Control Display

The display will flash when powered up or after a power loss. Press CANCEL to clear. When oven is not in use, the time of day is displayed. Indicator lights show functions that are in use.

Tones

Tones are audible signals, indicating the following:

Basic Functions

One tone

Valid pad press

Oven is preheated (long tone)

Function has been entered

Reminder (on some models), repeating each minute after the end-of-cycle tones

Three tones

Invalid pad press

Four tones

End of cycle

Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to Celsius.

To change: Press and hold BROIL for 5 seconds. A tone will sound, and “°C” or “°F” will appear on the display. Repeat to change back.

To exit mode, press CANCEL.

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door may cause element cycling to give incorrect readings.

The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature calibration can be adjusted. It can be changed in Fahrenheit or Celsius.

To Adjust Oven Temperature Calibration:

1.Press and hold BAKE for 5 seconds until the oven display shows the current calibration, for example “0°F CAL” or “00.”

2.Press the TEMP/TIME “+” or “-” keypads to increase or to decrease the temperature in 10°F (5°C) amounts. The adjustment can be set between 30°F (15°C) and -30°F (-15°C).

3.Press START.

Options Mode

Press and hold KITCHEN TIMER for 5 seconds, and “Opt” will appear. Use the TEMP/TIME keys to cycle through the following options. Press CANCEL to exit the mode.

End of Cycle Tones

“b1” (beep once) or “b” (continue to beep) will be displayed. Press KITCHEN TIMER to toggle through selection.

12-Hour Shutoff

If “12 Hr” is displayed, the oven will automatically shut off after

12 hours. Press KITCHEN TIMER to toggle to “- Hr” to disable the 12-hour shutoff.

Oven Light with Door Open

“LOn” indicates that the oven light will turn on when the door is open. If “LOFF” is displayed, the oven light will turn on only with the oven light switch. Press KITCHEN TIMER to toggle through selection.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom finish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil because air must be able to move freely.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow

2" (5 cm) of space around bakeware and oven walls. Make sure that no bakeware piece is directly over another.

Racks

Position racks before turning on the oven.

Do not move racks with bakeware on them.

Make sure racks are level.

To move a rack, pull it out to the stop position, raise the front edge, and then lift out. Use the following illustration and charts as a guide.

5

4

3

2

1

6

Page 6
Image 6
Maytag W10234645A, W10238819A warranty Oven USE, Electronic Oven Controls, Aluminum Foil, Positioning Racks and Bakeware

W10238819A, W10234645A specifications

Maytag, a trusted name in the appliance industry, offers a variety of products designed for durability and performance. Among their range, the Maytag W10234645A and W10238819A are two notable models that stand out in modern kitchens. These products not only speak to the brand's commitment to quality but also incorporate advanced technologies and features tailored to meet today's consumer needs.

The Maytag W10234645A is primarily a replacement part associated with various kitchen appliances, acting as a key component that ensures optimal performance. It is often utilized in dishwashers to provide efficient cleaning and effective operation. One of its noteworthy features is the rugged construction designed to withstand the wear and tear of everyday use. This component ensures that users can rely on their appliances for consistent performance, highlighting Maytag's reputation for durability.

On the other hand, the Maytag W10238819A is another crucial component, often linked to the brand's range of refrigerators. This model is engineered for efficiency, contributing to the overall energy-saving strategy of Maytag appliances. It showcases a commitment to sustainability while ensuring that food preservation is never compromised. This component often integrates seamlessly into the existing refrigerator setup, exemplifying the brand's focus on user-friendly designs.

Both the W10234645A and W10238819A incorporate advanced technologies that enhance their functionality. These models are designed to work effectively with Maytag's smart appliances, which often feature connectivity options, allowing users to monitor and control their appliances remotely. This integration of technology simplifies kitchen management, offering convenience to busy households.

In addition to innovative features, Maytag ensures that both components are easy to install and maintain. This focus on user experience allows customers to perform DIY repairs without extensive technical knowledge, ultimately saving time and service costs.

Overall, the Maytag W10234645A and W10238819A exemplify the brand's commitment to quality, innovation, and user satisfaction. With their robust features and modern technologies, they continue to empower consumers to enjoy kitchen efficiency while minimizing their environmental impact. Whether catering to the complexities of meal preparation or simple day-to-day tasks, these Maytag components highlight the brand's dedication to excellence and reliability in home appliances.