5LED DISPLAY AND SETTINGS BUTTONS
When you select a cycle, its default settings will light up and the Estimated Time Remaining (for Sensor Cycles) or actual time remaining (for Timed Cycles) will be displayed.
Use the buttons along the bottom of the display to adjust settings. See Cycle Guide for available settings on each cycle. Not all settings are available with all cycles.
Cycle Status Lights
The indicator bar at the top of the display will let you know what stage of the drying cycle is in process. For more information on each stage, see “Cycle Status Indicators”.
Temp Level
When using Timed Cycles or Auto Refresh, you may select a dry temperature based on the type of load you are drying. Use the warmest setting safe for the garments in the load. Follow garment label instructions.
NOTE: Sensor Cycles use a preset temperature that is not adjustable.
Dryness Level
You may adjust the Dryness Level on Sensor Cycles, if desired.
NOTE: Dryness Level is for use with Sensor Cycles only.
Damp Signal
When selected, a signal will sound during the drying cycle when the load is damp but not completely dry. This will allow you to take clothes out of the load that do not need to dry completely. This option is available on Heavy Duty, Normal, Denim, Bedding, Wrinkle Control, and Delicate cycles.
6OPTION BUTTONS
Use these buttons to select available options for your dryer. Not all cycles and options are available on all models.
Wrinkle Prevent/Wrinkle Prevent with Steam (on some models)
If you will be unable to remove a load immediately, press Wrinkle Prevent to add up to 150 minutes of periodic tumbling to help reduce wrinkling. On models with Wrinkle Prevent with Steam, a short steam cycle is added after 60 minutes to help smooth out wrinkles.
NOTE: On models with Wrinkle Prevent with Steam, you may turn off Steam by pressing and holding the Wrinkle Prevent button until - St appears in the display. The dryer will remember this setting for future loads. To turn Steam back on, press and hold the Wrinkle Prevent button again for several seconds.
Drum Light
Press to turn the LED drum light on or off. The light will also turn on when the door is open, and turn off automatically after about 5 minutes.
Cycle Signal
Use this button to turn the signal indicating the end of a drying cycle on or off, or to adjust the volume of the signal.
NOTE: You may also turn off the tones that sound when a button is pressed. Press and hold the Cycle Signal button for about one second to turn button sounds on or off.
Control Lock
Use this button to lock the controls of the dryer and avoid an accidental change in cycle options or preferences during a drying cycle.
7REDUCE STATIC (on some models)
Press to add the Reduce Static option to a Sensor cycle. The dryer will automatically tumble, pause, and introduce a small amount of moisture into the load to help reduce static. This option adds approximately 8 minutes to the total cycle time.
8STEAM BOOST (on some models)
Steam Boost adds steam to the end of the Heavy Duty, Bedding, Normal, or Denim cycle to help smooth wrinkles. Steam Boost can be used with High or Medium heat settings.
7
