Maytag W10376241A - SP, W10343072A warranty Select Water Level Select Fabric Softener On or Off

7. Select WATER LEVEL 9. Select FABRIC SOFTENER On or Off

Select the load size setting most suitable for your load. Small will add a low amount of water for smaller loads and Large will add the most amount of water for large or bulky loads. Items need to move freely.

Set FABRIC SOFTENER to ON if you want to add fabric softener.

IMPORTANT: Fabric Softener option must be selected to “On” to ensure proper distribution at correct time in cycle. Do not overfill or dilute.

8. Select TEMPERATURE
	10. Pull out Cycle knob to begin wash
	cycle

Once you select a cycle, select the desired wash temperature by turning the WASH TEMPERATURE knob to the appropriate setting based on your load. All rinses are tap cold.

NOTE: Always read and follow fabric care label instructions to avoid damage to your garments.

Wash Temp	Suggested Fabrics
Hot
Some cold water is added to save	Whites and pastels
energy. This will be cooler than	Durable garments
your hot water heater setting.
	Heavy soils
Warm
Some cold water will be added, so	Bright colors
this will be cooler than what your	Moderate to light soils
previous washer provided.
Cool
Warm water may be added to	Colors that bleed
assist in soil removal and to help	or fade
dissolve detergents.	Light soils
Cold
This is the temperature from your	Dark colors that
faucet. If your tap cold water is	bleed or fade
very cold, warm water may be	Light soils
added to assist in soil removal and
help dissolve detergent.

Pull out the Cycle knob to start the washer.

To stop or restart your washer:

•To stop the washer at any time, push in the Cycle knob.

•To restart the washer, close the door (if open) and pull out the Cycle knob.

10