REF1.800
Mono Amplifiers
FEATURES:
-1 Set of RCA inputs
-LEVEL: Variable sensitivity from 0.2V to 5V
-BASS EQ: Adjustable 45Hz bass boost from 0dB to 12dB
-SUBSONIC: Variable from 15Hz to 55Hz
-LOW PASS: Variable from 40Hz to 150Hz
Interconnect cable checklist:
Connect the inputs to a suitable source, e.g. a head unit with good quality RCA cables.
Use at least #12 gauge speaker wiring. The amps have dual speaker terminals, simplifying the hookup of multiple speakers. These amps are mono, 1 channel, amplifiers which have multiple positive and negative connections for ease of wiring. The 2 positives are the same internally and the 2 negatives are the same internally.
|
| BASS |
|
| INPUT |
MODE | REMOTE BOOST | SUBSONIC LOW PASS | LEVEL | ||
|
|
|
| R | Master |
|
|
|
|
| Out |
Slave | Master |
|
|
|
|
In | Out | 0dB 12dB | 15Hz 55Hz 40Hz 150Hz | 5V 0.2V | Slave |
|
|
|
| L | In |
-MASTER OUT: Mono RCA signal to Slave amplifier when linking.
-SLAVE IN: Mono RCA signal in from Master amplifier when linking.
-MODE: Selectable Slave In and Master Out selection when linking amplifiers.
-REMOTE: Connection for dash mount level control.
Control checklist:
Refer to the section “Settings for Best Performance”
Minimum final loudspeaker impedance: 1-Ohm.
MIN MAXX
DESIGNATED
MONO OUTPUT FROM HEAD UNIT
Slave Master In Out | MODE |
|
| REMOTE |
|
0dB 12dB | BOOST | BASS |
15Hz 55Hz | SUBSONIC |
|
40Hz | LOW |
|
150Hz | PASS |
|
5V 0.2V | LEVEL |
|
| R |
|
| INPUT |
|
Slave In | Master Out |
|
|
| MONO | |
|
| SUBWOOFER | |
OUTPUT |
| + | |
| + | ||
SPEAKER |
| - | |
|
| - | |
FUSE |
| TO BATTERY + 12 Volts | |
INPUTPOWER | BATT+12VREMGND | ||
VIA FUSE | |||
|
| ||
|
| REMOTE | |
|
| CHASSIS GROUND | |
POWER |
| PROTECT |
6
