MAINTENANCE
MAINTENANCE
SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Engine Oil Level
Change Engine Oil
Oil Pivot Points
Inspect Spark Arrester / Muffler
Clean Air Cooling System
Clean Air Filter
Replace Air Filter
Clean Area Around Muffler And Controls
Replace Spark Plug
|
|
|
|
|
|
|
|
| OR |
| ANNUALLY | OR | ANNUALLY |
|
| USE |
|
|
| HOURS |
| HOURS |
| HOURS |
| ||
| EACH |
| HOURS |
|
|
|
|
|
| ||||
BEFORE | FIRST |
| 8 | 25 |
| 50 |
|
| |||||
| 5 | EVERY |
| EVERY |
| EVERY |
| ANNUALLY | |||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
3 | 1,2 |
2
2
SERVICE DATES
1 - Change more often when operating under a heavy load or in high ambient temperatures. 2 - Service more often when operating in dirty or dusty conditions.
3 - Initial oil change should be performed after first five (5) hours of operations.
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain tiller as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your tiller.
At least once a season, check to see if you should make any of the adjustments described in the Service and Ad- justments section of this manual.
•Once a year you should replace the spark plug, clean or replace air filter, and check tines and belts for wear. A new spark plug and clean air filter assure proper air- fuel mixture and help your engine run better and last longer.
BEFORE EACH USE
•Check engine oil level.
•Check tine operation.
•Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See “LUBRICATION CHART”).
LUBRICATION CHART
c TINE CONTROL
dENGINE
cSAE 30 OR
dREFER TO MAINTENANCE “ENGINE” SECTION
10
