SAFETY RULES

Safe Operation Practices for Walk-Behind Powered Rotary Tillers

TRAINING

Read the Owner’s Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

Disengage all clutches and shift into neutral before starting the engine (motor).

Do not operate the equipment without wearing adequate outer garments. Wear footwear that will improve footing on slippery surfaces.

Handle fuel with care; it is highly flammable.

Use an approved fuel container.

Never add fuel to a running engine or hot engine.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Replace gasoline cap securely and clean up spilled fuel before restarting.

Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

Do not put hands or feet near or under rotating parts.

Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

Exercise caution to avoid slipping or falling.

If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Stop the engine (motor) when leaving the operating position.

Take all possible precautions when leaving the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. Disconnect the cord on electric motors.

Do not run the engine indoors; exhaust fumes are dangerous.

Never operate the tiller without proper guards, plates, or other safety protective devices in place.

Keep children and pets away.

Do not overload the machine capacity by attempting to till too deep at too fast a rate.

Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

Never allow bystanders near the unit.

Use only attachments and accessories approved by the manufacturer of the tiller.

Never operate the tiller without good visibility or light.

Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

MAINTENANCE AND STORAGE

Keep machine, attachments, and accessories in safe working condition.

Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to ensure the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Always refer to the operator’s guide instructions for important details if the tiller is to be stored for an ex- tended period.

- IMPORTANT -

CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRITICAL INFORMATION IN THIS MANUAL.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to bet- ter understand, incorporate, or execute a particular set of instructions.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

CAUTION: Always disconnect spark plug wire and place wire where it can- not contact spark plug in order to pre- vent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING

The engine exhaust from this product con- tains chemicals known to the State of Cali- fornia to cause cancer, birth defects, or other reproductive harm.

2

Page 2
Image 2
McCulloch 96083000300, 433691, MC550 manual Safety Rules, Training, Preparation, Operation, Maintenance and Storage

96083000300, MC550, 433691 specifications

The McCulloch 433691, also known as the MC550, is a versatile and robust chainsaw designed for both homeowners and professionals seeking efficiency and reliability in their tools. Packed with advanced features and cutting-edge technologies, the MC550 stands out in a competitive market.

One of the primary highlights of the McCulloch 433691 is its powerful engine. It is equipped with a robust 50cc two-stroke engine that delivers impressive cutting power. This engine ensures efficient fuel consumption while providing high torque, which allows for faster cuts through various types of wood. The chainsaw’s lightweight design, combined with this powerful engine, offers users great maneuverability, making it ideal for both trimming branches and felling larger trees.

The MC550 is built with an automatic oiling system, which guarantees that the chain remains lubricated during operation. This feature not only enhances the longevity of the chain and bar but also ensures smoother cutting action and less wear and tear on the tool. Additionally, the chainsaw's tool-free chain tensioning system provides convenience, allowing users to easily adjust the chain without the need for additional tools, thus saving time and effort.

Safety is a top priority in the design of the McCulloch 433691. The chainsaw incorporates several safety features, including a chain brake that instantly halts the chain in case of kickback. The anti-vibration system further enhances user comfort, significantly reducing fatigue during prolonged use. The ergonomic handle is designed to provide a secure grip, ensuring better control while operating the saw.

Another notable characteristic of the MC550 is its user-friendly design. The chainsaw comes with clear instructions, making it straightforward for beginners while still providing all the necessary functionality that experienced users might expect. The compact size and lightweight nature of the saw enable easy transport and storage.

In summary, the McCulloch 433691 (MC550) is a powerful and efficient chainsaw, featuring a robust engine, automatic oiling system, and essential safety mechanisms. Its blend of performance, convenience, and safety makes it an excellent choice for anyone looking to tackle outdoor cutting tasks with ease and confidence. Whether you are a homeowner needing to maintain your garden or a professional arborist, the MC550 is equipped to meet your chainsawing needs effectively.