ASSEMBLY

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

CHECK BATTERY (See Fig. 3)

Lift seat pan to raised position.

If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in MAINTENANCE section of this manual for charging instructions).

SEAT PAN

LABEL

TERMINAL

TERMINAL

FIG. 3

NOTE: You may now roll your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

Press lift lever plunger and raise attachment lift lever to its highest position.

Release parking brake by depressing clutch/brake pedal.

Place gearshift lever in neutral position.

Roll tractor forward off skid.

Remove banding holding deflector shield up against tractor.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PER- FORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

All assembly instructions have been completed.

No remaining loose parts in carton.

Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

Seat is adjusted comfortably and tightened securely.

All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

Check wiring. See that all connections are still secure and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

Engine oil is at proper level.

Fuel tank is filled with fresh, clean, regular unleaded gasoline.

Become familiar with all controls, their location and function. Operate them before you start the engine.

Be sure brake system is in safe operating condition.

Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

7

Page 7
Image 7
McCulloch 532 40 80-72 manual Check Battery See Fig, Check Tire Pressure, Check Deck Levelness, Check Brake System

532 40 80-72 specifications

The McCulloch 532 40 80-72 is a standout model in the realm of garden and lawn care equipment, known for its power, efficiency, and user-friendly features. Designed for homeowners and professional landscapers alike, this versatile tool is equipped to handle a wide range of outdoor tasks, making it an essential addition to any gardening arsenal.

At the heart of the McCulloch 532 40 80-72 is a robust engine that delivers reliable performance. This powerful, two-stroke engine is designed for high efficiency, providing ample cutting power while maintaining lower fuel consumption. This not only ensures longer operational periods but also contributes to a more environmentally friendly approach to yard maintenance. The engine is optimized for reduced emissions, complying with modern environmental regulations without sacrificing performance.

One of the remarkable features of the McCulloch 532 40 80-72 is its ergonomic design. The machine boasts a comfortable grip handle that reduces fatigue during prolonged use. With an adjustable handle height, it caters to users of varying heights, allowing for a more personalized and comfortable experience. This attention to ergonomics ensures that users can manage their lawn care tasks with less strain, promoting productivity and ease of use.

Additionally, the cutting deck of the McCulloch 532 40 80-72 is engineered for durability and precision. The high-quality steel construction offers exceptional strength, while the design allows for efficient grass collection and even cutting. With adjustable cutting heights, users can customize the grass length to their preferences, enabling them to achieve a well-manicured lawn effortlessly.

Another noteworthy aspect of this model is its innovative starting system. Equipped with a reliable pull-start mechanism, the McCulloch 532 40 80-72 ensures quick and easy starts, even in cold weather conditions. This feature is particularly beneficial for those who need to get their outdoor tasks done swiftly, minimizing downtime and maximizing efficiency.

The self-propelled functionality adds an extra layer of convenience, allowing users to maneuver the mower with ease across varying terrain types. This feature not only reduces the physical effort required but also enhances the overall mowing experience.

In summary, the McCulloch 532 40 80-72 combines power, durability, and user-friendly features to create a high-performing lawn care solution. Its efficient engine, ergonomic design, durable cutting deck, and easy starting system make it a reliable choice for anyone seeking to maintain their outdoor spaces efficiently and effectively. Whether for occasional yard work or regular maintenance, the McCulloch 532 40 80-72 stands out as an exemplary tool in modern lawn care technology.