SAFETY RULES

Safe Operation Practices for Walk-Behind Powered Rotary Tillers

TRAINING

Read the Owner’s Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

Disengage all clutches and shift into neutral before starting the engine (motor).

Do not operate the equipment without wearing ade- quate outer garments. Wear footwear that will improve footing on slippery surfaces.

Handle fuel with care; it is highly flammable.

Use an approved fuel container.

Never add fuel to a running engine or hot engine.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Replace gasoline cap securely and clean up spilled fuel before restarting.

Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

Do not put hands or feet near or under rotating parts.

Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

Exercise caution to avoid slipping or falling.

If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Stop the engine (motor) when leaving the operating position.

Take all possible precautions when leaving the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

Keep children and pets away.

Do not overload the machine capacity by attempting to till too deep at too fast a rate.

Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

Never allow bystanders near the unit.

Use only attachments and accessories approved by the manufacturer of the tiller.

Never operate the tiller without good visibility or light.

Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

MAINTENANCE AND STORAGE

Keep machine, attachments, and accessories in safe working condition.

Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Always refer to the operator’s guide instructions for important details if the tiller is to be stored for an ex- tended period.

- IMPORTANT -

CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRITICAL INFORMATION IN THIS MANUAL.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

CAUTION: Always disconnect spark plug wire and place wire where it can- not contact spark plug in order to pre- vent accidental starting when setting up, transporting, adjusting or making repairs.

Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. Disconnect the cord on electric motors.

Do not run the engine indoors; exhaust fumes are dangerous.

Never operate the tiller without proper guards, plates, or other safety protective devices in place.

WARNING

The engine exhaust from this product con- tains chemicals known to the State of Cali- fornia to cause cancer, birth defects, or other reproductive harm.

2

Page 2
Image 2
McCulloch MC900, 532 43 21-09, 96083000400 manual Safety Rules, Training, Preparation, Operation, Maintenance and Storage

MC900, 96083000400, 532 43 21-09 specifications

The McCulloch 96083000400, also known as the MC900, is an exceptional outdoor power tool engineered for both performance and versatility. Designed for demanding applications, this product is particularly useful for homeowners and landscapers who require robust and reliable equipment.

One of the key features of the MC900 is its powerful engine. With a displacement engine designed to tackle various yard tasks, it provides ample power to cut through tough vegetation with ease. The engine is built for efficiency, helping users to complete their work more quickly without excessive fuel consumption.

The MC900 is notable for its low weight, making it easier for users to maneuver during extended periods of operation. This lightweight design significantly reduces user fatigue, which is particularly beneficial for those who engage in prolonged yard work. The ergonomic design of the handles also contributes to user comfort, allowing for a better grip and control.

Technologically, the MC900 incorporates advanced anti-vibration systems that help reduce the amount of vibration transferred to the user's hands. This technology is crucial for user comfort, reducing the risk of fatigue and injury during operation. The saw's chain brake provides an additional safety measure, quickly stopping the chain in the event of kickback, thus enhancing user protection.

Another significant characteristic is its ease of use. The McCulloch MC900 features a quick-start system, which allows users to start the engine effortlessly, saving valuable time. The tool's chain tensioning system is user-friendly, allowing for easy adjustments without the need for additional tools, ensuring optimal performance throughout its operation.

Maintenance of the MC900 is simplified through its easy-access air filter and spark plug, enabling users to perform routine upkeep with minimal effort. This feature is particularly appealing to those who may not have extensive mechanical experience.

In summary, the McCulloch 96083000400 MC900 is an exemplary outdoor power tool characterized by its powerful engine, lightweight design, advanced vibration control, and user-friendly features. It is well-suited for various cutting tasks, making it a reliable choice for both residential and professional applications. With its focus on comfort, safety, and ease of maintenance, the MC900 stands out as a leading option for outdoor enthusiasts.