Instructions for the User
12.EXTRAORDINARY MAINTENANCE
Occasionally, the oven will require minor servicing procedures or the replacement of parts subject to wear and tear, such as gaskets, light bulbs, etc. The specific operations for each procedure of this kind are provided below.
Before carrying out any operations, disconnect the appliance from the electricity supply.
12.1 Changing the light bulb
Remove the protective cover A by unscrewing it clockwise; replace the bulb B with another of the same type (25 W). Replace the protective cover A.
Use only light bulbs approved for ovens (T 300°C).
12.2 Removing the door
Raise levers B and hold the door on both sides with both hands near hinges A and. Lift up the door forming an angle of about 45° and remove. To refit, slide the hinges A in the grooves, drop the door and release levers B.
12.3Oven door seal
To permit thorough cleaning of the oven, the seal may be removed. Before removing the seal, take off the door as described above. Once the door has been taken off, lift the tabs at the corners as shown in the figure.
84
