![7. DESCRIPTION OF FRONT PANEL CONTROLS](/images/new-backgrounds/72048/7204811x1.webp)
Instructions for the User
7. DESCRIPTION OF FRONT PANEL CONTROLS
All the control and monitoring devices are clearly in view on the front panel. The table below provides the key to the symbols used.
OVEN THERMOSTAT | FRONT |
FUNCTION SELECTOR | REAR |
KNOB |
|
| REAR |
| FRONT |
| CENTRAL COOKING ZONE |
Before using the oven, check that the display is showing the symbol (see point “10. ELECTRONIC PROGRAMMER”).
HOB CONTROL KNOBS
Standard heating
The ring beside each knob identifies the corresponding cooking zone. To switch it on, turn the knob to the required setting. Setting is on a gradual scale, so all the intermediate positions between the numbers can be used.
To switch off the zone, return the knob to the setting
Dual heating
The ring beside each knob identifies the corresponding cooking zone. To heat the inner cooking zone, turn the knob to the required setting. To heat both cooking zones (inner
and outer) simultaneously, turn the knob to /
/
and then release it. The knob will return to the maximum setting. To regulate the heating level, turn the knob
zone, turn the knob to and then turn it to the required setting. To switch off the zone, return the knob to
76