2 - SAFETY PRECAUTIONS
2 - SAFETY PRECAUTIONS
2-3. IMPORTANT SAFETY INSTRUCTIONS
WARNING
When using an electric chain saw, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
READ ALL INSTRUCTIONS
1.Double insulated - No Serviceable Parts Inside.
2.To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider then the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified elec- trician to install the proper outlet. Do not change the plug in any way.
3.With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents.
4.KEEP THE WORK AREA CLEAN: Cluttered areas invite injuries. Do not start cutting until you have a clear work area, secure footing, and a planned retreat path from the falling tree.
5.GUARD AGAINST ELECTRIC SHOCK: Prevent body contact with grounded surfaces (i.e., metal pipes, wire fences).
6.CONSIDER THE WORK AREA ENVIRONMENT: Use extreme caution when cutting small sized brush and sapling, as slender material may catch the saw chain and be whipped toward you or pull you off balance. Do not operate a chain saw in a tree unless you are specifically trained to do so. When cutting a limb that is under tension, be alert for spring back so that you will not be struck when the tension in the wood fibers is released. Do not expose the chain saw to rain. Do not use the chain saw in damp or wet locations. Do not use the chain saw in the presence of flammable liq- uids or gases.
7.KEEP CHILDREN AND BYSTANDERS AWAY: Do not let visitors contact the chain saw or extension cord. All visitors should be kept away from the work area.
8.STORING YOUR CHAIN SAW: When not in use, chain saws should be stored out of the reach of children, in a dry, high or
9.DO NOT FORCE THE CHAIN SAW: The chain saw will do a better and safer job when used at the rate for which it was intended.
10.USE THE RIGHT TOOL: Cut wood only. Do not use the chain saw for purposes for which it was not intend- ed. For example, do not use the chain saw for cutting plastic, masonry, or
11.DRESS PROPERLY: Do not wear loose clothing or jewelry, as they can get caught in moving parts. Non- skid footwear is recommended when working out- doors. Wear protective hair covering to contain long hair.
12.USE SAFETY GEAR: UsE safetY glasseS, safety foo- twear, safety chaps, snug fitting clothing, protective gloves, and protective hearing and head gear.
13.STAY ALERT: Watch what you are doing. Use com- mon sense. Do not operate the chain saw when you are tired. Keep all parts of your body away from the saw chain when the motor is operating. Before you start the saw, make sure the saw chain is not contact- ing anything.
14.MAINTAIN YOUR CHAIN SAW: Inspect the chain saw cords periodically and, if damaged, have them repaired by an authorized service facility. Keep the cord clear of the chain and operator at all times. Never carry the saw by the cord or pull it to disconnect from receptacle. Keep the cord from oil and sharp edges. Inspect the extension cords periodically and replace if damaged. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Keep handles dry, clean and free from oil and grease.
15.DISCONNECT THE CHAIN SAW: Disconnect the chain saw when not in use, before servicing, and when changing accessories and attachments such as saw chain and guard.
16.OUTDOOR EXTENSION CORDS: Use only exten- sion cords intended for use outdoor use and so mark- ed accordingly.
17.CHECK DAMAGED PARTS: Before further use of the chain saw, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of mov- ing parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center, unless otherwise indicated in this instruction manual.
Have defective switches replaced by authorized serv- ice centre. Do not use chain saw if switch does not turn it on and off. Do not operate a chain saw that is damaged, improperly adjusted, or is not completely and securely assembled. Be sure that the saw chain stops moving when the trigger is released.
18.CARRYING THE SAW: Carry the saw by the front handle with the saw stopped. Keep your finger off the switch, and make sure that the guide bar and saw chain are to the rear.
19.GUARD AGAINST KICKBACK:
WARNING
Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinch- es the saw chain in the cut. Tip contact in some cases may cause a
A.GRIP SAW FIRMLY: Hold the chain saw firmly with both hands when the motor is running. Keep a good firm grip on the saw with both hands, the right hand on the rear handle, and the left hand on the front handle.
B.Do not over reach.
C.Keep proper footing and balance at all times.
D.Do not let the nose of the guide bar contact a log, branch, ground or other obstruction.
E.Do not cut above shoulder height.
F.Use devices, such as
G.Use only replacement bars and chains specified by the manufacturer or the equivalent.
H.There are no other replacement components for achieving kickback protection in accordance with CSA Z62.3.
20.POWER SUPPLY: Connect the chain saw to correct voltage; be sure that the voltage supplied is the same as that specified on the nameplate of the tool.
21.DO NOT operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Be sure that the saw chain stops moving when the trigger is released.
22.DO NOT attempt operations beyond your capacity or experience.
23.DO NOT operate a chain saw with one hand! Serious injury to the operator, helpers, or bystanders may result from
24.TO REDUCE potential for electric shock, do not oper- ate the saw on wet or slippery surfaces, or during snow storms, rain storms, and other adverse weather conditions.
25.DO NOT allow dirt, debris or sawdust to build up on the motor or outside air vents.
26.Follow the manufacturer’s sharpening and mainte- nance instructions for the saw chain.
27.Cut at high motor speeds.
28.Operation of a chain saw should be restricted to mature, properly instructed individuals.
29.Your chain saw is intended for occasional homeowner use. It is not made for continuous heavy duty use.
30.DO NOT FORCE a small saw to do a job requiring a heavier duty unit.
31.EXAMINE THE ELECTRICAL SWITCHES. Do not use the chain saw if the switches do not properly turn on and off. Do not attempt to make any repairs to the electric switches. Take your saw to a McCulloch Authorized Service Center.
32.MAINTAIN EXTENSION CORDS. Inspect the exten- sion cords periodically and replace if damaged. Only use power cords that are suitably marked for outdoor use.
33.DO NOT OPERATE YOUR CHAIN SAW near or around flammable liquids or gases, whether in or out of doors. An explosion and/or fire may result.
34.This electric powered saw is classified by CSA as a Class 2C saw. It is intended for infrequent use by homeowner’s, cottagers and campers, and for such general applications such as clearing, pruning, cutting firewood, etc. It is not intended for prolonged use. If the intended use involves prolonged periods of oper- ation, this may cause circulatory problems in the user’s hands due to vibration. It may be appropriate to use a saw having an
35.NEVER REMOVE, modify or make inoperative any safety device furnished with your unit.
36.Safety clothing required by your safety organizations, government regulations, or your employer should be used; otherwise, snug fitting clothing, safety footwear, safety chaps and hand and ear protection should be worn.
37.When felling, keep at least two (2) tree lengths betw- een yourself and your fellow workers.
38.All chain saw service, other than the items listed in the user manual safety and maintenance instructions, should be performed by competent chain saw person- nel. Do not attempt to repair it yourself; there are no user serviceable parts inside.
NOTE:
39.DO NOT USE ANY OTHER CUTTING ATTACH- MENT OR ACCESSORIES. Use only McCulloch
replacement parts and accessories, which are designed specifically to enhance the performance and maximize the safe operation of our products. Failure to do so may cause poor performance and possible injury. Use only the chain and bar supplied with this product. Do not use any other cutting attachment. Use of such attachments will void your factory warranty and could result in serious bodily injury.
6
7
