A. General description
1) GUIDE BAR | 10) BAR CLAMP NUTS |
2) CHAIN | 11) MOTOR AND AIR SLOTS |
3) FRONT HANDLE | 12) ELECTRIC POWER LEAD |
4) SAFETY CHAINBRAKE / FRONT HAND GUARD | 13) CHAIN CATCHER |
5) OIL FILLER CAP | 14) REAR HAND GUARD |
6) SAFETY | 15) SPIKES |
7) OIL LEVEL INDICATOR | 16) OWNERS MANUAL |
8) TRIGGER | 17) BLADE SHEATHS |
9) CHAIN TENSION SCREW | 18) LOCKING NUT |
Safety precautions
Use the Electramac
Explanation of Symbols
Read the instructions carefully and make sure you fully under- stand how all the controls work
Protective goggles or approved facemask
Approved earplugs or mufflers
Approved safety footwear
Always keep a first aid kit on hand
Emission of noise into the environment according to the applicable EEC directive
This product complies with the
EEC directives in effect
Warning/Important
Operations of inspection and maintenance should always be carried out with the motor off and the stop button in the stop position
Brake on /off
Beware of kickback
Clean regularly
Do not cut with the end of the bar as this increases the risk of kickback
Always hold the machine with both hands