SERVICE AND ADJUSTMENTS

TO REPLACE BELTS (See Fig. 20)

The auger and traction drive belts are not adjustable. If the belts are damaged or begin to slip from wear, they should be replaced. It is recommended that the belt(s) be replaced by a service center/department.

NOTE: It is recommended that both the auger and traction drive belt be replaced at the same time.

The V-belts on your snow thrower are of special construc- tion and should be replaced by original equipment manu- facturer (OEM) belts available from your nearest service center/department. Using other than OEM belts can cause personal injury or damage to the snow thrower.

WARNING: Belt replacement requires separation of the snow thrower. While separating the auger housing from the frame assembly, it is important that an assistant stand in the operating position and hold the snow thrower handles. Serious personal injury and/ or damage to the unit could occur if the snow thrower should fall during the belt changing process.

FRAME

AUGER

ASSEMBLY

HOUSING

HANDLES

1.REMOVE GASOLINE FROM FUEL TANK - Drain gasoline from fuel tank into a suitable container, out- doors, away from fire or flame. Wipe up any spilled gasoline.

2.REMOVE DISCHARGE CHUTE - Loosen locknut securing chute rotator head to mounting bracket only enough to allow chute rotator head to be raised and discharge chute to be removed from snow thrower.

3.REMOVE BELT COVER - See “TO REMOVE BELT COVER” in this section of this manual.

4.REMOVE ENGINE PULLEY - Remove bolt, flat washer securing pulley to engine crankshaft. Remove outside (auger) pulley only from crankshaft.

5.SEPARATE SNOW THROWER - With your assistant standing in the operating position holding the handles, remove the two (2) bolts holding the auger housing and frame together.

WARNING: As the last bolt is removed, have your assistant carefully lower the handles down to the ground.

6.REMOVE HAIRPIN FROM CLUTCH ROD and re- move clutch rod from swing plate. Tip swing plate forward.

7.REMOVE AUGER BELT from around pulley.

8.RELIEVE TENSION ON TRACTION DRIVE BELT IDLER and remove traction drive belt from around pulleys.

HINT: Insert a 3/8" drive ratchet (in the “ON” position) into the square hole in idler arm and rotate ratchet clockwise to relieve tension.

9.With tension relieved on idler, install new traction drive belt around pulleys and inside belt keepers.

10.Install clutch rod in swing plate; secure with hairpin.

11.Place auger belt around and inside the groove of auger pulley only.

12.While your assistant slowly raises handles to rejoin the auger housing and frame assembly, pull up on the auger belt and squeeze sides together above pulley so belt is fully seated in groove of pulley.

13.Move idler arm so it does not hit impeller pulley as you bring snow thrower completely together and check carefully for proper routing of belts. If auger belt has become dislodged from the pulley (by catching the idler arm bracket while bringing snow thrower together), separate the snow thrower and repeat step 12. Belt must be fully seated in pulley groove when bringing the snow thrower together.

14.Install the two (2) hex bolts and tighten securely.

15.INSTALL ENGINE PULLEY - Place belt in pulley groove and slide pulley on crankshaft. Install flat washer, bolt and tighten securely (41-47 N-m torque). Make sure belt is inside belt keeper.

16.INSTALL BELT COVER and two (2) screws. Tighten securely.

17.INSTALL DISCHARGE CHUTE – See “INSTALL DIS- CHARGE CHUTE / CHUTE ROTATER HEAD” in the Assembly / Pre-Operation section of this manual.

 

BELT KEEPER

 

 

 

TRACTION DRIVE BELT

 

 

ENGINE

FLAT WASHER

 

PULLEY

 

 

 

 

 

BOLT

 

IDLER ARM

 

AUGER

SQUARE

 

BELT

HOLE

 

 

 

CLUTCHING

 

 

 

IDLER ARM

 

 

 

BRACKET

 

 

FRAME

AUGER PULLEY

AUGER

HOUSING

 

 

 

BOLTS

 

16

FIG. 20

 

Page 16
Image 16
McCulloch MC12527ES owner manual To Replace Belts See Fig

MC12527ES specifications

The McCulloch MC12527ES is a versatile and powerful chainsaw, designed for homeowners and professionals who require durability and efficiency for a variety of cutting tasks. This model is a perfect companion for pruning, cutting firewood, or even felling small trees.

One of the most notable features of the MC12527ES is its 27cc, 2-stroke engine. This engine delivers ample power for most cutting jobs while remaining lightweight and easy to handle. Its efficient engine design ensures that users can work longer without experiencing excessive fatigue, making it ideal for extended periods of use. Additionally, the chainsaw comes equipped with an easy-start system, which significantly reduces the effort required to start the motor. This feature is particularly useful for users who may struggle with traditional pull-start mechanisms.

The McCulloch MC12527ES also boasts a 12-inch bar and chain, which provides a perfect balance between cutting capacity and maneuverability. The length is suitable for a variety of tasks, allowing users to easily navigate through branches and limbs with precision. The chainsaw also features an automatic oil pump, which ensures that the chain remains well-lubricated during operation, promoting longer chain life and reducing wear and tear.

Safety is a priority in the design of the MC12527ES. The chainsaw includes a chain brake that instantly stops the chain in the event of kickback, protecting the user from potential injuries. This safety feature, along with an ergonomic handle, enhances user control and comfort during operation, making it an excellent choice for both beginners and experienced operators alike.

Another highlight of the McCulloch MC12527ES is its compact design. Weighing just around 10 pounds, this chainsaw is not only lightweight but also easy to transport and store. The saw features a tool-less chain tensioning system, allowing quick and easy adjustments on the go without the need for additional tools, which adds to its user-friendly nature.

Durable construction ensures that the MC12527ES can withstand the rigors of regular use. The high-quality materials used in its design mean that the chainsaw can handle tough cutting tasks without compromising performance. In essence, the McCulloch MC12527ES is a reliable and effective chainsaw that combines innovation, safety, and ease of use, making it a valuable investment for anyone looking to tackle outdoor cutting jobs with confidence.