SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 20)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

Place attachment clutch in “DISENGAGED” position.

Move attachment lift lever forward to lower mower to its lowest position.

Roll belt off engine pulley.

Work belt off both mandrel pulleys and idler pulleys.

Pull belt away from mower.

BELT INSTALLATION -

Work new belt around both mandrel pulleys and idler pulleys.

Install new belt into engine pulley groove.

Make sure belt is inside the belt keeper at the idler and on both sides of the wire belt keeper as shown.

IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES.

IDLER PULLEYS

MANDREL

PULLEY

Fig. 20

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

1.Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

2.Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

TO REPLACE MOTION DRIVE BELT (See Fig. 21)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Remove belt from stationary idler and clutching idler.

Remove belt downward from around engine pulley.

Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

Carefully work new belt down between transaxle belt keepers and onto the input pulley.

Slide belt into the center span keeper.

Pull belt toward front of tractor and roll around the top groove of engine pulley.

Install belt through stationary idler and clutching idler.

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

CENTER SPAN

KEEPER

TRANSAXLE

PULLEY

Fig. 21

20

Page 20
Image 20
McCulloch 532 43 27-66 To Replace Mower Blade Drive Belt See Fig, To Check Brake, To Replace Motion Drive Belt See Fig

532 43 27-66, MC18542LT, 96012010400 specifications

The McCulloch 96012010400, also known as the MC18542LT, is a versatile and efficient lawn tractor designed for homeowners who demand convenience and performance in their gardening tasks. This model offers a perfect blend of power, durability, and ease of use, making it an excellent choice for various lawn care activities.

One of the main features of the MC18542LT is its robust engine. Powered by a reliable and efficient Briggs & Stratton engine, it delivers sufficient horsepower to tackle even the most challenging terrain. The engine's design emphasizes fuel efficiency, allowing users to cover larger areas without frequent refueling. This is complemented by a smooth automatic transmission system that provides seamless speed adjustments and optimal control for the operator.

A standout characteristic of the McCulloch MC18542LT is its cutting deck, which measures 42 inches. This size strikes a balance between maneuverability and cutting efficiency, providing a thorough and clean cut in fewer passes. The deck height can be easily adjusted, accommodating various grass types and conditions, ensuring a well-maintained lawn throughout the mowing season.

In addition to its powerful engine and efficient cutting system, the MC18542LT is designed with user comfort in mind. The ergonomic seat and intuitive controls make the tractor easy and enjoyable to operate, allowing users to focus on their lawn care tasks without discomfort. Its compact design also allows for easy navigation in tighter spaces, making it suitable for small to medium-sized lawns.

Furthermore, the McCulloch MC18542LT incorporates advanced technologies that enhance its performance and usability. This includes features such as a turning radius that allows for sharp turns, enabling users to tackle corners and edges with precision. The tractor is also compatible with various attachments, including mulching kits, baggers, and snow blades, enhancing its versatility and making it an all-season tool for homeowners.

In conclusion, the McCulloch 96012010400, MC18542LT, or 532 43 27-66, is a well-rounded lawn tractor that meets the needs of modern gardeners. With its powerful engine, adjustable cutting deck, and user-friendly design, it offers an efficient solution for maintaining a pristine lawn. Its adaptability through various attachments further cements its position as a valuable addition to any homeowner's toolkit, ensuring that lawn care is both easy and effective.