SECTION 4 – ADJUSTMENTS & REPAIRS
4.5 TRANSMISSION SHIFT ROD ADJUSTMENT
The transmission shift rod is preset at the factory, and should not need adjustment. However, if transmission fails to shift into forward or reverse, adjustment may be needed. To adjust rod:
1.With cargo bed lifted and propped securely, loosen jam nut securing rod adjusting link. See Figure 4.6.
2.If transmission fails to shift into Forward, turn link counterclockwise
3.If transmission fails to shift into Reverse, turn link clockwise
4.Retighten jam nut against link, start vehicle and check shifter operation.
5.Repeat steps
ROD ADJUSTING LINK
TURN LINK CLOCKWISE IF TRANSMISSION FAILS TO SHIFT INTO REVERSE
LOOSEN JAM NUT
TURN LINK COUNTERCLOCKWISE IF TRANSMISSION FAILS TO SHIFT INTO FORWARD
FIGURE 4.6
WARNING
DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. Set park brake. Shift transmission to Neutral. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine.
296
