SECTION 2 – OPERATING INSTRUCTIONS
2.5PARKING MACHINE
The park brake has a ratcheting lock mechanism. When setting the brake a clicking sound will be heard as the mechanism engages and locks the brake. To set and hold the machine properly, two or more clicks may be required. Always park the machine on a flat surface. Inspect brakes for proper operation before each use. Refer to Maintenance section of this manual for inspection and adjustment procedures.
WARNING
DO NOT park machine on slopes. DO NOT leave machine with engine running. Stop machine. Stop engine. Set park brake. Shift transmission to Neutral and remove key before leaving the machine for any reason.
A.Bring machine to a complete stop on a flat surface.
B.Pull the park brake knob up to engage parking brake.
C.Depress brake pedal firmly. (2 or more clicks.)
D.Stop engine.
E.Shift transmission to Neutral.
F.Remove key.
2.6USING DIFFERENTIAL LOCK
The differential lock is only used when increased traction is needed. Locking the differential causes both rear wheels to turn equally, improving traction. The differential lock should not be used at speeds in excess of 10 mph. The differential will remain locked as long as the control is in the “locked” position. Be sure to “Unlock” the differential when increased traction is no longer needed. Do not attempt to turn machine with the differential locked. The machine and wheels must be fully stopped before locking differential.
F.When increased traction is no longer needed the differential must be unlocked. Move differential lock lever to the “Unlocked” position.
G.Resume normal machine operation.
2.7DRIVING THE MACHINE
IMPORTANT! OPERATOR MUST BE 16 YEARS OLD OR OLDER AND POSSESS A VALID DRIVER’S LICENSE
2.7.1.Before operating machine, read understand and follow all instructions and warnings in this manual and on the machine, engine and attachments. Careless, reckless operation can cause accidents resulting in damage and injury. It is extremely important that the operator of this machine understand that it is not a toy. Engaging in horseplay, joy riding, racing, jumping, hill climbing and similar activities greatly increases the likelihood of accidents, which may result in damage, serious injury or death. Operating machine on slopes, carrying loads and towing require extra caution.
2.7.2.The machine is equipped with a Continuously Variable Torque drive train. No manual up shifting or down shifting of gears is required. The transmission automatically
WARNING
DO NOT lock differential until machine and rear wheel motion has stopped. DO NOT operate machine at speeds in excess of 10 mph with the differential locked. DO NOT turn machine with differential locked. Unlock differential when increased traction is not required.
A.Bring machine and wheels to a complete stop. IMPORTANT! All motion must be stopped before attempting to lock the differential.
B.Move the differential lock lever to the front of the slot and latch in the “Locked” position.
C.Shift transmission to desired direction.
D.Move accelerator pedal slowly. The differential will lock when the rear wheels turn at slightly different speeds.
E.Drive the machine only in a straight line and at a slow speed.
186
