McCulloch MCB2205 Assembly Instructions, Vacuum Attachment Assembly, Conversion To Blower, 3-2A

3 - ASSEMBLY INSTRUCTIONS

3 - ASSEMBLY INSTRUCTIONS

Remove blower from carton and examine it thoroughly to make sure it is not damaged. This electric blower requires no tools for assembly. Read your User manual carefully before assembly and operation.

3-1. VACUUM ATTACHMENT ASSEMBLY

Make sure the unit is unplug from electric outlet.

1.Pull the vacuum/blower slide (A) to top. (Fig. 3-1A)

2.Insert the vacuum tube I (B) into unit (C). Align tabs

(D) on vacuum tube I (B) with grooves (E) in the hous- ing (Fig 3-1B), and twist in clockwise direction to ensure the arrow mark (F) is on the assistant handle side (G). (Fig. 3-1C)

3.Align grooves (K) on vacuum tube II (L) with locking hole (M) in vacuum tube I (N) (Fig. 3-1D) then connect

2 tubes, unit the two arrows aligned in line. (Fig. 3-1E) NOTE : The vacuum nozzle should be assembled pointing up. (Fig. 3-1F)

4.Attach the vacuum bag to the vacuum bag adapter. (Fig. 3-1G)

5.Insert the bag adapter into the unit. (Fig. 3-1H)

A

G

F

3-1C

MK

NL

3-1D

3-1G

3-2B

A

3-1H

3-2C

3-2.CONVERSION TO BLOWER

1. To convert this unit from a vacuum back into a		C
blower, remove vacuum tubes and push sliding	B
intake cover to the closed position. (Fig. 3-2A & Fig.
3-2B)

2.Press down the red button (A) on the unit and remove vacuum bag. (Fig. 3-2C)

3.Pull the blower tube (B) from (C), till it’s engaged.

(Fig. 3-2D)

4. Attach the blower tubes to the unit by sliding the large end of the blower tube into the blower outlet

3-1A

E

D

B

C

3-1B

3-1E

3-1F

until firmly in place. (Fig. 3-2E)

3-2A

3-2D

3-2E

6

7