McCulloch 6096-200317, MCS2003 Save These Instructions, Safety Precautions Assembly Instructions

2 - SAFETY PRECAUTIONS

3 - ASSEMBLY INSTRUCTIONS

2-4. INTERNATIONAL SYMBOLS

3-1. CONNECTING WHEEL ASSEMBLY

3-3. HOPPER ASSEMBLY

15.The operation of any tool can result in foreign objects being thrown into your eyes, which can

result in severe eye damage. Before operating power tool, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We rec- ommend wide Vision Safety Mask for use over eye- glasses or standard safety glasses with side shields.

1.Never place hands into discharge chute as serious injury will occur (Figure 2-1).

2.Use of these personal safety items is highly recom- mended to reduce the risk of accidental injury (Figure 2-2).

1.Place legs onto axle. Put the wheel spacers and wheels onto the ends of the axle.

2.Secure wheels using the flat wheel washers and wheel nuts.

3.Put on wheel caps.

Place the hopper on top of the feed tube and align the fix- ing holes. Secure with the safety set screws.

2-3. EXPLANATION OF NOTE, WARNING, AND WARRANTY SYMBOL

1.A NOTE is used to convey additional information, or highlight a particular explanation, or to expand a instruction.

2.A WARNING identifies a procedure which, if not undertaken or if improperly done, can result in a seri- ous personal injury or damage to the unit and/or both.

3.(WARRANTY SYMBOL) serves notice that unless instructions or procedures are followed,

any damage will void the warranty and repairs will be at owner’s expense. Service other than user mainte- nance should be performed by a McCulloch Authorized Service Center. Damage or conditions caused BY improper maintenance practices which render this product inoperable will void the manufac- turer’s warranty.

4.FOR WARRANTY OR SERVICE contact the nearest McCulloch Authorized Service Center.

SAVE THESE

INSTRUCTIONS

3-1A

3-2. LEGS ASSEMBLY

1.Open the hopper chute by turning the caging knob, then place the motor housing on a flat surface.

2.Secure legs using the four bolts, saddle washers and nuts. (2 per side)

3-3A

Use of these personal safety items is highly recommended to reduce the risk of accidental injury.

Never place hands into ejection chute as serious injury will occur.

2-1 2-2

6

3-2A

7