Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for | Quantity | Part Number | Description |
shipment, the equipment must be packed exactly as shown | 1 | 033888 | Shipping carton only |
below. It is very important that the four plastic feet are at- | 4 | 033887 | End cap (Foam pad) |
tached to the bottom of the equipment. Two #10 x |
|
|
|
screws and washers must be used to fasten the unit securely | 1 | 033697 | Inside carton only |
to the bottom pad and wood skid. This will ensure the | 1 | 033725 | Top Pad |
proper equipment location on the bottom pad. Failure to do | 1 | 034008 | Bottom pad |
this will result in shipping damage. | 3 | 017218 | Plastic foot (spacer) |
Use the original shipping carton and interior parts only | 1 | 033699 | Wood skid |
if they are all in good serviceable condition. If a shipping | 2 | 101169 | #10 x |
carton or any of the interior part(s) are needed, please call | 2 | 104033 | #10 x |
or write Customer Service Department of McIntosh Labo- |
|
|
|
ratory. Please see the Part List for the correct part numbers. | 4 | 017218 | Plastic foot |
| 4 | 100159 | |
| 4 | 104083 | #10 x 7/16” Flat washer |
19
