McIntosh MC1201 manual Specifications Specifications

Specifications

Specifications

Power Output

Minimum sine wave continuous average power output is: 1,200 watts into 2 ohm load

1,200 watts into 4 ohm load

1,200 watts into 8 ohm load

Rated Power Band 20Hz to 20,000Hz

Total Harmonic Distortion

Maximum Total Harmonic Distortion at any power level from 250 milliwatts to rated power output is: 0.005% for 2, 4 or 8 ohm loads

Dynamic Headroom 2.1dB

Frequency Response

+0, -0.25dB from 20Hz to 20,000Hz +0, -3dB from 10Hz to 100,000Hz

Sensitivity

2.45Volts Balanced Input

4.9Volts Unbalanced Input

A-Weighted Signal To Noise Ratio

93dB Unbalanced (120dB below rated output) 97dB Balanced (124dB below rated output)

Intermodulation Distortion

Maximum Intermodulation Distortion if instanta- neous peak output does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20,000Hz is:

0.005% for 2, 4 or 8 ohm loads

Input Impedance

10,000 ohms Balanced or Unbalanced Inputs

Wide Band Damping Factor

100 @ 8ohms

Power Requirements

100 Volts, 50/60Hz at 18 amps

110 Volts, 50/60Hz at 16.5 amps

120 Volts, 50/60Hz at 15 amps

220 Volts, 50/60Hz at 8.2 amps

230 Volts, 50/60Hz at 7.8 amps

240 Volts, 50/60Hz at 7.5 amps

Note: Refer to the rear panel of the MC1201 for the correct voltage.

Dimensions

Front Panel: 17-3/4 inches (46cm) wide, 11 inches (28cm) high. Depth behind front mounting panel is 19-5/8 inches (49.83cm). Clearance required in front of the Front Panel is 1-3/4 inches (4.5cm) for handles.

Weight

147 pounds (66.7 kg) net, 172 pounds (78.0 kg) in shipping carton

18