McIntosh MC352 manual Packing Instructions

Packing Instructions

Packing Instructions

In the event it is necessary to repack the equipment for shipment, the equipment must be packed exactly as shown below. It is very important that the four plastic feet are at- tached to the bottom of the equipment. Four 1/4-20 x 2-1/ 4” cap screws and washers must be used to fasten the unit securely to the shipping skid. This will ensure the proper equipment location on the shipping skid. Failure to do this will result in shipping damage.

Use the original shipping carton and interior parts only if they are all in good serviceable condition. If a shipping carton or any of the interior part(s) are needed, please call or write Customer Service Department of McIntosh Labo- ratory. Please see the Part List for the correct part numbers.

Quantity Part Number Description

1034051 Shipping carton bottom

1034052 Shipping carton top

2034054 Foam pad (front and rear)

2034053 Foam pad (sides)

2034055 Foam pad (top and bottom)

1035050 Inner carton top

1034049 Inner carton bottom

1034048 Foam pad inner carton

1 034056 Shipping skid

4101212 1/4-20 x 2-1/4” cap screw

4 104058 Flat washer

1049289 Shipping carton complete with all the above parts

11