Figure 3
connecting the Crossover to the Loudspeakers on pages 8 and 9.
Mounting Screw Locations
Installation
Mounting the Crossover
When selecting a Crossover mounting location, make sure there is adequate room for ventilation (there are openings on both sides of the Cross-
over) and for making con- nections to it. Use the sup- plied screws for mounting the Crossover to the vehicle.
1.Using the Crossover as a template, mark the two locations to drill holes in the mounting surface for the Cross- over mounting screws. Drill two holes with an appropriate size drill bit. Refer to figure 3.
2.Secure the Crossover to
the mounting surface with the two #6 x 7/8 inch supplied Sheet Metal Screws. Refer to figure 4.
3. Follow instructions for
Side View
1
4
23
Mounting
Screws
Mounting
Surface
Figure 4
7
