Telescope

Viewfinder Eyepiece

A. Not aligned

B. Aligned

Fig. 13: Aligning the viewfinder. Note that objects appear upside-down and reversed left-for-right when observed in the viewfinder.

Fig. 14: Eyepiece and focuser assembly.

Fig. 15: Eyepiece and Barlow lens.

DEFINITION:

A capital "X" is used to denote an eyepiece's (or a Barlow's) power or magnification. For exam- ple, "40X" is read as "40-power."

Aligning the Viewfinder:

It is recommended that you perform steps 1 through 4 of this procedure during the daytime and step 5 at night.

1.Loosen the Az lock (19, Fig. 1) and the Alt lock (22, Fig. 1) by turning the locks about one turn counterclockwise, permitting the telescope to move freely on its axes.

2.If you have not already done so, place a low-power (e.g., 25mm) eyepiece in the eyepiece holder of the main telescope (2, Fig. 1) and point the telescope at an easy-to-find land object (e.g., the top of a telephone pole). Turn the focuser knob (1, Fig. 1) so that the image is sharply focused. Center the object precisely in the main telescope’s field of view.

3.Re-tighten the Az lock (19, Fig. 1) and the Alt lock (22, Fig. 1).

4.Now, looking through the viewfinder, turn some or all of the viewfinder’s alignment screws (6, Fig. 1) until the viewfinder’s crosshairs point precisely at the same object as centered in the main telescope. The viewfinder is now aligned to the main telescope. The right-hand image in Fig. 13A shows an object centered in the main telescope before the viewfinder (the left-hand image) has been aligned to the main telescope. Fig. 13B shows these same images after the viewfinder and main telescope are aligned.

5.Check this alignment on a celestial object, such as the Moon or a bright star, and make any necessary refinements.

Choosing an Eyepiece

A telescope’s eyepiece magnifies the image formed by the telescope’s main optics. Each eye- piece has a focal length, expressed in millimeters, or “mm.” The smaller the focal length, the higher the magnification. For example, an eyepiece with a focal length of 9mm has a higher magnification than an eyepiece with a focal length of 25mm.

Your telescope comes supplied with a low-powered 25mm eyepiece which gives a wide, com- fortable field of view with high image resolution.

Low power eyepieces offer a wide field of view, bright, high-contrast images, and eye relief dur- ing long observing sessions. To find an object with a telescope, always start with a lower power eyepiece such as a 25mm. When the object is located and centered in the eyepiece, you may wish to switch to a higher power eyepiece to enlarge the image as much as practical for pre- vailing seeing conditions.

NOTE: Viewing conditions vary widely from night-to-night and site-to-site. Turbulence in the air, even on an apparently clear night, can distort images. If an image appears fuzzy and ill-defined, back off to a lower power eyepiece for a more well-resolved image.

The power (or magnification) of a telescope is determined by the focal length of the telescope and the focal length of the eyepiece being used. To calculate eyepiece power, divide the tele- scope's focal length by the eyepiece's focal length. For example, you may wish to use a 25mm eyepiece. Look up the focal length of the telescope under "Specifications," page 30. The focal length is listed as 910mm.

Telescope focal length divided by Eyepiece focal length = Eyepiece power

910 25 = 37

The eyepiece power, or magnification is therefore 37X (approximately).

The Barlow Lens

Some Meade telescopes include a power multiplier called a Barlow lens. The Barlow supplied with the DS-114AT triples the power obtained by an eyepiece alone. In the example above, a 25mm eyepiece results in 37X magnification. When used with the supplied Barlow, the tele- scope optics result in a 111X magnification. To use the Barlow, insert it into the eyepiece hold- er, followed by the eyepiece (Fig. 15).

12

Page 12
Image 12
Meade DS-114AT instruction manual Choosing an Eyepiece, Barlow Lens, Aligning the Viewfinder

DS-114AT specifications

The Meade DS-114AT is a popular entry-level telescope that combines user-friendliness with impressive optical performance, making it an excellent choice for budding astronomers and hobbyists. With its robust design and advanced features, the DS-114AT offers a gateway to the wonders of the cosmos, whether you’re observing the craters of the Moon, the rings of Saturn, or distant star clusters.

One of the standout features of the Meade DS-114AT is its 114 mm (4.5-inch) diameter aperture. This sizable opening allows for greater light-gathering capability, resulting in brighter images and improved visibility of celestial objects. The telescope is equipped with a 900 mm focal length, providing a good balance that allows for both wide-field viewing and detailed observations of planets and lunar features.

The DS-114AT utilizes high-quality optics featuring a parabolic mirror design. This design minimizes spherical aberration, ensuring crisp images of astronomical targets. The telescope is also equipped with a fully coated optical system that enhances light transmission and reduces glare, providing clearer images compared to other telescopes in its class.

Portability is another significant advantage of the Meade DS-114AT. Its lightweight and compact design allows for easy transportation, making it ideal for backyard stargazing or trips to darker skies. The telescope comes with a sturdy yet lightweight altazimuth mount that facilitates smooth movement, allowing users to easily locate and track celestial objects.

The Meade DS-114AT also features a user-friendly electronic control system, including an automated GoTo functionality that aids in navigating the night sky. With a simple push of a button, users can precisely locate thousands of celestial objects, making the telescope accessible for beginners who may not yet be familiar with star maps and constellations.

Additionally, the telescope includes two eyepieces, a 9 mm and a 25 mm, allowing for various magnifications to suit different viewing preferences. The optical finder scope aids in quick alignment, ensuring a hassle-free observing experience.

In summary, the Meade DS-114AT stands out as a versatile, user-friendly telescope that provides excellent optical performance and advanced features. Its combination of a sizable aperture, high-quality optics, portability, and automated features make it an ideal choice for those looking to explore the universe, whether for casual observations or more serious astronomical pursuits. With this telescope, the night sky is truly within reach.