Meade TE688W Viewing Remote Channel Temperature And Humidity, Setting Temperature Alarm

OPERATION

•To select the indoor/ outdoor temperature and humidity mode,

press UP (? ) or DOWN (? ) until the IN icon flashing with a beep sound alert.

VIEWING REMOTE (CHANNEL) TEMPERATURE AND HUMIDITY

Static Display:

•Press the CHANNEL button to select measurements from different remote sensors, each is set to a unique channel 1, 2 or 3.

Channel Auto-Scan Display:

•To enable an automatic scan of all channels, press and hold CHANNEL, until the icon is displayed. The measurements from each remote channel will be alternately displayed with a 5 seconds viewing.

NOTE: the channel auto-scan feature can be active only if there are more than one remote sensors operating and are set to different channels.

PROGRAMMING TEMPERATURE IN CELSIUS OR FAHRENHEIT

•Press and hold MODE button for 3 seconds to toggle the temperature unit in Celsius (ºC) or Fahrenheit (ºF).

SETTING TEMPERATURE ALARM

•Press down button to select temperature display.

•Press ALARM button selecting the desired alarm, the upper

temperature alert with icon (if disabled, displays OFF), or lower temperature alert with icon (if disabled, displays OFF).

•Press and hold ALARM button until the temperature digits flashing.

•Adjust the temperature digits using the UP (? ) or DOWN (? ). Press and hold either button for fast digits advance

•Press the ALARM to confirm selection and return to the temperature alarm selection screen

ACTIVATING OR DEACTIVATING TEMPERATURE ALARMS

•Once the above alerts are displayed, press the UP (? ) or DOWN (? ) to enable or disable the corresponding alert.

14