Mega System Tech RS232, RS485, RS422 manual Connection, Connect Status, Mode Description

Chapter 5: NET101 Web Manager

Select the appropriate time zone for your area.

System Time (mm/dd/yyyy hh:mm:ss)

This section is to set NET101 System Time manually. The format is pre-determined to: mm/dd/yyyy hh:mm:ss

2.2.4Connection

This section determines the connection type for NET101.

i.Connect Status

Choose a mode for the current NET101.

Mode	Description
Master	Master mode is selected when the NET101 is used in a
	one-on-one configuration with another NET101. The master
	NET101 will define the communication baud rate, data length,
	stop bit, etc. The slave NET101 will have the same exact
	communication mode as the Master NET101.
Slave	Slave mode is selected when NET101 is used in a one-on-one
	configuration with the master NET101 or when connecting to
	the virtual COM port driver. The communication baud rate,
	data length, stop bit and others will all follow the instructions
	from the Master NET101 or the virtual COM driver.
MODBUS gateway	MODBUS gateway is selected when NET101 is used as a
	gateway between the MODBUS on serial and the MODBUS

NET101 User’s Manual -20-