UK

To get the best out of your new blender, please read these instructions carefully before using it for the first time. We also recommend that you save them in case you need them at a later point to remind yourself of the blender’s functions.

IMPORTANT SAFETY MEASURES

-Read the user instructions all the way through.

-Use the appliance for its intended purpose only.

-Never pull on the cord; to unplug from the socket, grasp the plug firmly and pull carefully.

-Keep the cord away from hot surfaces.

-Should the cord become damaged, it must be replaced at a workshop specified by the manufacturer, as special tools are required.

-Should the appliance itself become damaged, it must be taken to a specialist for repair. If the appliance is subjected to unauthorised repairs the guarantee will become void.

-Keep an eye on any children in the vicinity of the appliance when it is being used. The appliance should be kept out of the reach of children.

-For indoor use only.

-The blender is not for commercial use.

OVERVIEW OF FUNCTIONS:

1.Removable cap in lid

2.Lid with filling hole

3.Blender goblet

4.

Motor section

1.

5.

Switch

2.

 

3.

4.

5.

BEFORE USE:

Before using for the first time, take the blender apart and wash the blender goblet, lid and blade section in mild detergent and dry them thoroughly. Do NOT immerse the motor section in any form of liquid!

The base of the blender glass should be assembled in the following order:

1.clear plastic ring

2.blade element

3.silicon sealing ring with flange downwards.

USE:

1.Ensure that the knob is at 0.

2.Place the container on the motor unit, so that the pin on the plastic ring is positioned between the 2 arrows (otherwise the blender cannot start).

3.Place the required ingredients carefully in the blender goblet. Do not fill any higher than 1000 ml, otherwise it may overflow.

4.Carefully attach the lid, and plug the blender in.

5.Start the blender by turning the knob to the required position.

1:Low speed

2:High speed

0: Stop

Pulse: manual pulse function (high speed)

6.Once the ingredients have reached the desired consistency, turn the knob to 0. Do not remove the blender goblet from the motor section until the blade has stopped moving completely.

Your blender is equipped with a safety switch, which automatically cuts off the power to the motor if the blender goblet is not correctly fitted.

NB!

-Do not leave the blender running for more than 3 minutes at a time. Stop for a few minutes and start again.

-Do not remove the blender goblet while the motor is running.

-Always pour some liquid into the blender goblet if you are using it to crush ice.

10

Page 10
Image 10
Melissa 246-001, 246-012, 246-014 manual Important Safety Measures, Overview of Functions, Before USE, Use