FOR YOUR SAFETY READ BEFORE OPERATING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

A This appliance is equipped with an ignition device which automatically ignites the pilot. Do not try to light the pilot by hand

B.BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance

•Do not touch any electrical switch

•Do not use any phone in your building

•Immediately call your gas supplier from

a neighbour’s phone. Follow the gas suppliers instructions.

•If you cannot reach your gas supplier call the fire dept.

C. Use only your hand to push the gas control buttons. Never use tools. If the buttons will not activate by hand, don’t try and repair it, call a qualified service technician. Force or attempted repair may result in a fire or an explosion.

D. Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

OPERATING INSTRUCTIONS

STOP Read the safety information above.

•To turn the unit on (Refer to diagram below)

Do not attempt to light the pilot by hand.

Wait for five minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety information above. If you don’t smell gas, go to the next step.

Press the On / Off button. This operates the ignition sequence.

If the appliance does not light it will automatically turn off.

To re-attempt ignition, press the On / Off button again.

•To adjust the heat

Press the “ “ and “ “ buttons to increase and decrease the room temperature setting.

• To turn the unit off

Press the On /Off button. The appliance will turn off.

If the appliance will not operate; follow the instructions “to turn off the gas to appliance” and call your service technician or gas supplier.

TO TURN OFF GAS TO APPLIANCE

Turn off the appliance by operating the On/ Off button and turn off the power at the wall switch.

Disconnect the electric plug. This will isolate the gas supply and prevent the solenoid valve from opening.

8

Page 7 Page 9
Page 8
Image 8
Rinnai IB35ETRLC, IB35ETRN For Your Safety Read Before Operating, Operating Instructions, To Turn OFF GAS to Appliance
Page 7 Page 9

IB35ETRN, IB35ETRLC specifications

The Rinnai IB35ETRN and IB35ETRLC are advanced, energy-efficient heating solutions designed for residential and light commercial applications. These models belong to Rinnai's innovative range of condensing boilers, delivering exceptional performance while maximizing fuel efficiency.

One of the primary features of the Rinnai IB35ETRN and IB35ETRLC is their compact design. Both models are engineered to fit seamlessly into a variety of spaces, making them ideal for homes where space is at a premium. Their sleek, modern aesthetic complements contemporary décor, providing a discreet heating solution that does not compromise on performance.

The IB35ETRN and IB35ETRLC utilize cutting-edge condensing technology, which captures and reuses exhaust gases to enhance efficiency. This feature allows the boilers to achieve an impressive annual fuel utilization efficiency (AFUE) rating, making them not only environmentally friendly but also cost-effective in terms of energy consumption. Homeowners can appreciate reduced utility bills while maintaining comfortable indoor temperatures.

Another significant characteristic of these models is their modulating heating capacity. Both units can adjust their output based on the heating demands of the space, ensuring optimal comfort without unnecessary energy waste. This modulation capability means that the units can operate efficiently even in varying weather conditions, providing reliable warmth throughout the year.

The Rinnai IB35ETRN and IB35ETRLC are also designed with user-friendly interfaces that allow for easy operation and monitoring. Features such as programmable thermostats enable homeowners to set desired temperatures for different times of the day, further enhancing energy savings. The intuitive control systems provide clear displays of performance metrics, making it simple to manage heating requirements.

Safety and reliability are paramount, and both models are equipped with several protective features, including overload protection and automatic shutoff in the event of an issue. This technology ensures the safety of the home and adds peace of mind for users.

In summary, the Rinnai IB35ETRN and IB35ETRLC are state-of-the-art heating solutions that combine efficiency, compact design, and advanced technology. With their impressive AFUE ratings and modulating heating capacities, these models are ideal for those seeking reliable, energy-efficient heating systems for their homes or light commercial spaces. Rinnai's commitment to quality and innovation positions these boilers as top choices in today's market.
Top Page Image Contents