Manuals / Rinnai / Household Appliance / Electric Heater

Rinnai IB35ETRLC, IB35ETRN installation manual Electric Motor Maintenance, Burners

Models: IB35ETRN IB35ETRLC

1 32
Download 32 pages 19.04 Kb
Page 20
Image 20

• ELECTRIC MOTOR MAINTENANCE

Motors are permanently lubricated and need no lubrication.

Keep fan and motor free of dust and dirt, clean annually.

The heater should be serviced annually only by an authorised person.

•GLASS REPLACEMENT AND CLEANING. (May be performed by the owner)

It is best to handle the glass with clean gloves to avoid smearing the glass with finger prints which might show after replacement.

Refer diagram opposite

Open the side panels.(1) Access can now be obtained to the two top glass retaining screws.(2)

Gently lift the retaining trim away from the glass.(3)

Carefully lift the glass out of the bottom retaining channel, taking care not to damage the fiber seal on the perimeter of the glass.(4)

The glass may be cleaned with a damp sponge and soapy water. If the seal is damaged it should be replaced. Remove any soot deposit from the log set with a soft brush and a vacuum cleaner. Soot deposit may indicate that the flue is not drawing properly. Check the flue for correct operation.

It is best to handle the glass with clean gloves to avoid smearing the glass with finger prints which might show after replacement.

NOTE:

When replacing the glass make sure that the joint of the fiber seal is at the bottom of the glass.

• BURNERS

Due to the design of the burners in this heater, they do not require cleaning by the owner. The burners should be cleaned once a year by a qualified service agent.

FAN REMOVAL Refer diagram below

NOTE: The fan has a permanently lubricated bearing. DO NOT OIL.

20

Page 19 Page 21
Page 20
Image 20
Rinnai IB35ETRLC, IB35ETRN installation manual Electric Motor Maintenance, Burners
Page 19 Page 21

IB35ETRN, IB35ETRLC specifications

The Rinnai IB35ETRN and IB35ETRLC are advanced, energy-efficient heating solutions designed for residential and light commercial applications. These models belong to Rinnai's innovative range of condensing boilers, delivering exceptional performance while maximizing fuel efficiency.

One of the primary features of the Rinnai IB35ETRN and IB35ETRLC is their compact design. Both models are engineered to fit seamlessly into a variety of spaces, making them ideal for homes where space is at a premium. Their sleek, modern aesthetic complements contemporary décor, providing a discreet heating solution that does not compromise on performance.

The IB35ETRN and IB35ETRLC utilize cutting-edge condensing technology, which captures and reuses exhaust gases to enhance efficiency. This feature allows the boilers to achieve an impressive annual fuel utilization efficiency (AFUE) rating, making them not only environmentally friendly but also cost-effective in terms of energy consumption. Homeowners can appreciate reduced utility bills while maintaining comfortable indoor temperatures.

Another significant characteristic of these models is their modulating heating capacity. Both units can adjust their output based on the heating demands of the space, ensuring optimal comfort without unnecessary energy waste. This modulation capability means that the units can operate efficiently even in varying weather conditions, providing reliable warmth throughout the year.

The Rinnai IB35ETRN and IB35ETRLC are also designed with user-friendly interfaces that allow for easy operation and monitoring. Features such as programmable thermostats enable homeowners to set desired temperatures for different times of the day, further enhancing energy savings. The intuitive control systems provide clear displays of performance metrics, making it simple to manage heating requirements.

Safety and reliability are paramount, and both models are equipped with several protective features, including overload protection and automatic shutoff in the event of an issue. This technology ensures the safety of the home and adds peace of mind for users.

In summary, the Rinnai IB35ETRN and IB35ETRLC are state-of-the-art heating solutions that combine efficiency, compact design, and advanced technology. With their impressive AFUE ratings and modulating heating capacities, these models are ideal for those seeking reliable, energy-efficient heating systems for their homes or light commercial spaces. Rinnai's commitment to quality and innovation positions these boilers as top choices in today's market.