ERROR CODES
• ERROR CODE MESSAGE
The Flame Fire ETR has the ability to check its own operation continuously. If a fault occurs, an Error Message will flash on the Digital Display of the control panel. This assists with diagnosing the fault, and may enable you to overcome a problem without a service call. Please quote the code displayed when enquiring about service.
Error code | Probable cause | Comments | |
11 | Ignition failure | Check gas is turned on. | |
Service call if repeated | |||
|
| ||
12 | Flame failure | Check gas is turned on. | |
Service call if repeated | |||
|
| ||
14 | Overheat | Service call | |
|
|
| |
16 | Room overheat | Lower rom temperaure to | |
less than 104°F | |||
|
| ||
31 | Room temperature sensor faulty | Service call | |
|
| ||
32 | Service call | ||
| |||
|
|
| |
33 | Overheat temperature sensor faulty | Service call | |
|
|
| |
70 | faulty ON / OFF switch | Service call | |
|
|
| |
71 | Faulty soleniods | Service call | |
|
|
| |
72 | Faulty flame rod | Service call | |
|
|
| |
73 | Communication error | Service call | |
|
|
| |
99 | Flue block | Service call | |
|
|
| |
Power failure | Service call | ||
|
|
|
In all cases, you may be able to clear the Error Message simply by turning the unit OFF, then ON again. If the Error Message still remains or returns on the next operation, please contact your nearest service contact and arrange for a service call.
23