ELECTRICAL CONNECTION

There is a junction box provided at the front of the heater for the electrical connection.

WARNING: This appliance must be properly grounded for your protection against shock hazard.

Connecting the power supply:

Refer to the diagram opposite,

1Open the side doors.

2Loosen the screws holding the front panel in place.

3Remove the front panel by sliding to one side to release it and then sliding back again to release the other end. Take care not to place strain on the wires from the remote control receiver on the front panel.

4Remove the three lowest louvres from the heater by sliding to one side to release the end and then sliding back again to release the louvre completely.

5Remove the two screws holding the front cover of the junction box in place and remove the cover. A hole is provided on the right hand side of the junction box for a suitable electrical gland to be attached and the electrical supply to pass through.

6There are two wires (one black, one white) that have been partially bared inside the box and a grounding (earth) pole with a green wire attached. It is important that the power supply is connected to the correct wires and that the appliance is properly grounded by attaching a ground connection to the grounding pole.

Black wire = Hot (115V AC 60Hz)

White wire = Neutral

7Once all three connections have been made, make sure that all connections are safe and that the power connections cannot come into contact with the appliance casing.

Replace the cover on the junction box and reassemble the heater in the opposite order.

Take care not to trap or damage any wires when reassembling the appliance.

WARNING: Failure to properly ground this appliance with affect its operation and may cause damage to the appliance or personal injury.

16

Page 15 Page 17
Page 16
Image 16
Rinnai IB35ETRLC, IB35ETRN installation manual Electrical Connection, Refer to the diagram opposite
Page 15 Page 17

IB35ETRN, IB35ETRLC specifications

The Rinnai IB35ETRN and IB35ETRLC are advanced, energy-efficient heating solutions designed for residential and light commercial applications. These models belong to Rinnai's innovative range of condensing boilers, delivering exceptional performance while maximizing fuel efficiency.

One of the primary features of the Rinnai IB35ETRN and IB35ETRLC is their compact design. Both models are engineered to fit seamlessly into a variety of spaces, making them ideal for homes where space is at a premium. Their sleek, modern aesthetic complements contemporary décor, providing a discreet heating solution that does not compromise on performance.

The IB35ETRN and IB35ETRLC utilize cutting-edge condensing technology, which captures and reuses exhaust gases to enhance efficiency. This feature allows the boilers to achieve an impressive annual fuel utilization efficiency (AFUE) rating, making them not only environmentally friendly but also cost-effective in terms of energy consumption. Homeowners can appreciate reduced utility bills while maintaining comfortable indoor temperatures.

Another significant characteristic of these models is their modulating heating capacity. Both units can adjust their output based on the heating demands of the space, ensuring optimal comfort without unnecessary energy waste. This modulation capability means that the units can operate efficiently even in varying weather conditions, providing reliable warmth throughout the year.

The Rinnai IB35ETRN and IB35ETRLC are also designed with user-friendly interfaces that allow for easy operation and monitoring. Features such as programmable thermostats enable homeowners to set desired temperatures for different times of the day, further enhancing energy savings. The intuitive control systems provide clear displays of performance metrics, making it simple to manage heating requirements.

Safety and reliability are paramount, and both models are equipped with several protective features, including overload protection and automatic shutoff in the event of an issue. This technology ensures the safety of the home and adds peace of mind for users.

In summary, the Rinnai IB35ETRN and IB35ETRLC are state-of-the-art heating solutions that combine efficiency, compact design, and advanced technology. With their impressive AFUE ratings and modulating heating capacities, these models are ideal for those seeking reliable, energy-efficient heating systems for their homes or light commercial spaces. Rinnai's commitment to quality and innovation positions these boilers as top choices in today's market.
Top Page Image Contents