Rinnai IB35ETRN, IB35ETRLC Control Panel Layout, Operation, Turning On, Turning Off, Lock

CONTROL PANEL LAYOUT

For your convenience the controls on your new Flame Fire are situated under the cover on the top right-hand side of the fire and are accessed by simply lifting the lid. All necessary adjustments to the operation of your fire can be made with these controls.

OPERATION

• TURNING ON

Press the ON/OFF button to operate the unit. The ON indicator will glow green. The spark generator will be heard before the burner ignites and the ON indicator glows red, indicating that the burner is alight. Warm air can be felt coming from the louvres. The fan will come on automatically after 4 minutes.

If the unit does not ignite on initial use this may be due to air remaining in the gas supply line. The spark generator will only continue for 15 seconds. After this it will be necessary to press the ON/OFF button OFF, then ON again.

• TURNING OFF

Simply press the ON/OFF button to switch off the unit. The ON indicator will go out. The convection fan will continue to operate for several minutes after the burner has gone out in order to cool the appliance.

Do not turn off the heater by unplugging it from the wall. Do not unplug the heater while the convection

fan is running.

•ROOM TEMPERATURE ADJUSTMENT

The room temperature and preset temperatures are only displayed and adjustable while the heater is running.

Press the ““ button to increase the

temperature setting or “ “ button to decrease the temperature setting. The temperatures can be preset to:

a)[L] low (50°F)

b)[61°F] to [79°F] in 1°F steps

c)[H] (97°F)

Once the pre-set temperature has been reached the burners will cycle between high and low (or high and pilot only depending on the auto off setting).

• LOCK

The LOCK function will help prevent accidental operation of the controls.

LOCK is activated by pressing the button and the LOCK indicator will glow. To

9